| Author |
Topic: S10 PP, 2nd string, half raise, full lower |
Tim Bridges
From:
Hoover, Alabama, USA
|
Posted 25 Feb 2015 11:16 am |
|
What am I missing? I can easily get a 1/2 tone raise and 1/2 tone lower on string 2, but when I try to get a D#<D<C#, I can't get the 1/2 tone raise. Once I allow enough slack for the full step lower, there's too much slack to get the 1/2 tone raise.
Any help is much appreciated. The only other strings that share this KL are 1 and 7; 1 being a full tone raise and 7 being a 1/2 tone raise. I have searched the forum, but nothing specific to answer my question.
Am I limited to a 1/2 tone raise and lower on string 2?
Thanks for any answers! |
|
|
 |
richard burton
From:
Britain
|
Posted 25 Feb 2015 11:31 am
|
|
| You need to add more travel to the knee lever that raises the 2nd string a half tone |
|
|
|
chris ivey
From:
california (deceased)
|
Posted 25 Feb 2015 11:31 am
|
|
that's a lot of stuff going on for that lever, but i think you may have to increase the lever stop distance.
i would get the adjustments happening for the 2nd string, then incorporate the 1 and 7 around that. |
|
|
|
Tim Bridges
From:
Hoover, Alabama, USA
|
Posted 25 Feb 2015 11:51 am
|
|
That makes sense! Back to the undercarriage. I'll come up for air in a bit and let you know how things "travel"! 
Heck, it's cold, wet with a chance of snow; maybe I'll get it setup and get to play here in a bit! 
Thanks for your help! |
|
|
|
Justin Griffith
From:
Taylor, Texas, USA
|
Posted 25 Feb 2015 12:18 pm
|
|
I agree with Chris, it's going to take a bunch of travel and slack to make those pulls.
How are you going to handle the half stop on the lower?
Please Let us know how it turns out!
_________________
Emmons/Sho~Bud/Blanton, Fender/Peavey.
Telonics pedal |
|
|
|
Tim Bridges
From:
Hoover, Alabama, USA
|
Posted 25 Feb 2015 12:47 pm
|
|
Everything worked out perfect!!! I already had the half stop for D#<D<C#, fortunately. I just loosened the collars on strings 1 & 7 and increased the travel on the KL. Then I reset the collars on strings 1 & 7. Everything times out perfect. The travel on 1 & 7 didn't change. I just needed the travel for string 2 on the KL to get the full step lower and the 1/2 step raise. Now I can go play!
Thanks guys! I'll admit, I was having a little frustration building! I was overlooking the obvious, but it wasn't obvious to me at the time! Tunnel vision and thought aren't good. |
|
|
|
Justin Griffith
From:
Taylor, Texas, USA
|
Posted 25 Feb 2015 2:55 pm
|
|
😃😃😃
_________________
Emmons/Sho~Bud/Blanton, Fender/Peavey.
Telonics pedal |
|
|
|
