Carl Kilmer
From: East Central, Illinois
|
Posted 24 Jan 2015 4:41 am
|
|
Hi Cecil, if you're using Windows Internet Explorer, go to the bottom
right hand corner where it says 100% and click it, and change to 150%.
If your steel is Emmons tuning, play on the 3rd fret with A and B pedals
down, then move to the 1st fret with B pedel down and use the left knee
right. This will take you from the C to C7th. On the 3rd fret with no pedals
down, move up 3 frets to the 6th and use the A pedel and left knee lever left.
This will take you from a G chord to another G, just a different inversion.
Then you can go to the 10th fret with the A and B down for another G chord.
I hope this helps a little. I'm sure others will give a lot more ideas. _________________ aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|