| Author |
Topic: Wiring pickup to 3 way switch |
Bobby Harris
From:
Kentucky, USA
|
Posted 8 Feb 2022 1:46 am |
|
| Could anybody help me on wiring up a pickup on a 3 way switch this pickup up was in my rustler steel it was hooked up to a 3 way switch it worked fine it worked like a 3 way switch on a telecaster I put a new pickup in it I didn’t diagram the wires before I cut them I can’t get it wired back up right it has 4 wires one is a brown wire I know it is a ground the other wires is. Green yellow and blue any info would be apprieated thanks so much |
|
|
 |
John Sims
From:
Ft. Lauderdale, FL
|
Posted 10 Feb 2022 9:09 am
|
|
Will this help? I will also PM you some PDF files with different switch configs
_________________
Best Regards,
John
1997 Carter U-12 Double Body-Natural Birdseye Maple-8p/5k, Peavey Nashville 1000 Amp, Goodrich L10K Vol. Pedal, Boss DD-3 Delay, Boss CE-5 Chorus, Behringer UMC-204HD Audio Interface, AKAI MPK Mini MK3 Professional Midi Keyboard/Controller, Gretsch Bobtail Resonator, Fender Banjo, Rondo SX Lap Steel (C6), DIY Lap Steel (Open D), and a few Mojo Hand Cigar Box Guitars (MojoHandGuitars.com). |
|
|
|
D Schubert
From:
Columbia, MO, USA
|
Posted 10 Feb 2022 10:22 am
|
|
| It would be helpful if you could share, what were the three functions or settings when the switch was working? |
|
|
|
Jeff Highland
From:
New South Wales, Australia
|
Posted 10 Feb 2022 2:58 pm
|
|
Unfortunately wire colors are not standardised between manufacturers, You need to specify the brand of pickup
_________________
Duesenberg Fairytale
1949 Supro Supreme
1950 National New Yorker
2008 Highland Baritone Weissenborn
2020 Highland New Yorker.
2020 Highland Mohan Veena
2021 Highland Weissencone |
|
|
|
