| Author |
Topic: MSA Knee lever kit |
Brad Rigby
From:
Missouri
|
Posted 15 Dec 2014 3:32 pm |
|
I need a Vertical lever kit for a MSA S-10
Email / zumplayer@hotmail.com
Thanks
Brad |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 15 Dec 2014 5:02 pm
|
|
Go to www.psgparts.com
Or www.steelguitars.me
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Billy Knowles
From:
Kenansville, N. C. 28349 usa
|
Posted 15 Dec 2014 8:21 pm Msa
|
|
Steel Guitars of the North Country has them
_________________
Billy Knowles
STEEL GUITAR EAST
Emmons authorized dealer and approved service technician
my web site: http://www.steelguitareast.com |
|
|
|
Brad Rigby
From:
Missouri
|
Posted 16 Dec 2014 8:27 am Knee lever
|
|
| Thanks for the info. |
|
|
|
Brad Rigby
From:
Missouri
|
Posted 16 Dec 2014 9:23 am MSA Knee lever kit
|
|
Does anyone know whether psgparts.com is in business.
Both phone numbers are inoperable and no reply to email attempts.
Thanks
Brad |
|
|
|
Brad Rigby
From:
Missouri
|
Posted 16 Dec 2014 10:37 am MSA Knee lever kit
|
|
Finally reached Michael
Thanks |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 16 Dec 2014 2:04 pm
|
|
Everything in the kit is self explanatory, except for the wood screw. To make sure that the lever pull doesn't rotate on the shaft, the lever doesn't use a stop at the end of the shaft. The wood screw goes into the deck, under the lever pull.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 17 Dec 2014 6:02 am
|
|
Lane, wood screw?
Got a pic whenever you land back at home?
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 17 Dec 2014 6:55 am
|
|
Your kit came with one, Michael. I took this awhile ago, and I disconnected the lever from the pull so you can see it.
EDIT: Perhaps your kit didn't come with it, and Reece told me that they used a screw. Since the screw stops the lever and not the shaft, you CAN'T overpower it and twist the pull or the stop.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Michael Yahl
From:
Troy, Texas!
|
Posted 17 Dec 2014 9:17 am
|
|
No, I've never supplied those screws but I'll throw them in the kits.
It's a good simple idea that I wasn't aware of before.
Thanks for the info.
Michael
_________________
"Don't fergit to kiss yer horse!"
'72 Sho-Bud Professional D10, (in pieces .....), '78 MSA Classic XL D10, '69 Emmons PP, Fender 2000
Peavey Session 500 BW, Crate Digital Modeling Amp
PSG PARTS
http://www.psgparts.com/ |
|
|
|
