| Author |
Topic: WTB:tuner pan for fender 400 |
Steve Hamill
From:
California, USA
|
Posted 5 Sep 2014 8:56 am |
|
I know it's a long long shot, but... before I make some drastic and un-reversable changes to my stripped Fender 400 body I will ask nay beg for a usable tuner pan with or without tuners. I bought a completely stripped 400 body and have stripped and sanded the finish. I'm going to manufacture a bridge, nut, and install some lollar repro pickups, or possibly an Aiello of some ilk.
Any help, leads, suggestions for how to get around it are welcome. I also have the aluminum black frame it was mounted in if anyone needs one. I'm not going to use it.
 |
|
|
 |
Al Risbeck
From:
Iowa, USA
|
Posted 5 Sep 2014 10:14 am keyhead
|
|
Check with forum member Jim Palenscar at steelguitars@cox.net he works wonders with them and he got my 800 changer cover re-chromed, looks like new.
_________________
Mullen Discovery, GK mb200 with Eminence EPS-15C, Fender steel King with Eminence EPS-15C,Nashville 400 amp, with EPS-15C,Evans FET500 with Peavey 1501 BW Goodrich L10K V.P.(2),Goodrich L120, Bose L1 PA with ToneMatch 4 Mic control board |
|
|
|
Steve Hamill
From:
California, USA
|
Posted 6 Sep 2014 10:17 am Thanks Ethan and Al
|
|
| Found a tuner pan! I'll contact Jim about some tuners. Thanks friends! |
|
|
|
