Author |
Topic: Peavey Nashville 112 Pre-Gain Pot |
Mike Brinkmeyer
From: Houston, Texas
|
Posted 28 Aug 2014 12:25 pm
|
|
Can anyone tell me what ohm pot is required for the Pre-Gain on a Peavey Nashville 112?
10K? 50K?
Thanks . . . |
|
|
|
Scott Duckworth
From: Etowah, TN Western Foothills of the Smokies
|
Posted 28 Aug 2014 4:07 pm
|
|
10K Linear. Do yourself a favor and order it from Peavey. Their small parts are very reasonable, and an exact fit. There is a bracket with it. _________________ Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus! |
|
|
|
Roger Francis
From: kokomo,Indiana, USA
|
Posted 28 Aug 2014 5:10 pm
|
|
What Scott said, i replaced all of my pots at the same time, put on new knobs, grill and feet while i was at it, i think all the parts shipping and all came to about 50 -60 bucks _________________ Rittenberry SD10, 2 nashville 112s with telonics speaker, behringer EPQ450 power amp, 705 pups, Telonics FP-100, live steel strings, mogami cords, wet reverb |
|
|
|
Mike Brinkmeyer
From: Houston, Texas
|
Posted 28 Aug 2014 5:19 pm
|
|
Thanks guys . . . I appreciate it!
So all the the pots on the NV 112 are the same 10K linear? |
|
|
|
Ray Thomas
From: Goldsboro North Carolina
|
Posted 28 Aug 2014 5:40 pm Peavey Controls
|
|
Mike, I doubt if they are all 10 k, Call Peavey, tell them which one you need and they will send the correct one, suggest you check all the other controls for being clean and clear, better to change them while you are in there _________________ Ray Thomas
Livesteel Strings Dealer
Call 919-920-5482
Text rayssteel@gmail.com or email |
|
|
|
Roger Francis
From: kokomo,Indiana, USA
|
Posted 28 Aug 2014 5:45 pm
|
|
Pull your amp out of the cabnet and the pots have part numbers written on them, im thinking there was only 2 different pots for all of them _________________ Rittenberry SD10, 2 nashville 112s with telonics speaker, behringer EPQ450 power amp, 705 pups, Telonics FP-100, live steel strings, mogami cords, wet reverb |
|
|
|