| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Breaking strings
Reply to topic
Author Topic:  Breaking strings
Nick Waugh


From:
United Kingdom
Post  Posted 25 Aug 2014 10:17 am    
Reply with quote

I am breaking a lot of strings lately. They are breaking pretty much right on or near the rollers of the bridge. I was advised when I first started playing to put a tiny drop of oil on the G" string to prevent possible breakages. I do this now to all the top strings. Could this be causing the strings to break somehow? It is the 3 and 4th strings that are breaking now and every 2 or 3 days this is happening. It's really frustrating. Anyone got any ideas on how to stop this?

Thanks

Nick
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 25 Aug 2014 10:26 am    
Reply with quote

Make sure your rollers are turning.
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 25 Aug 2014 10:33 am    
Reply with quote

You mean the rollers of the nut, or the changer fingers?
If you mean the changer fingers, the bridge end, you probably have a small rough spot, burr or groove where the string leaves the finger and heads towards the keyhead.
CAREFUL dressing with small fine files can smooth this out (but you don't want to change the curve of the finger, that will mess up how it plays).
To figure out whether this is your problem, loosen the string a bit and move it to one side or the other and see if it lasts any longer. Or use a strong magnifying glass or a good digital camera (in good strong light, putting a good quality phone just about an inch off the fingers and taking a picture will help)
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Henry Matthews


From:
Texarkana, Ark USA
Post  Posted 25 Aug 2014 8:31 pm    
Reply with quote

I can't remember breaking a string in a year and i do a lot of playing and I dont change strings until they go dead.
What brand of strings do you use? You may have gotten a bad batch or they may be old. If any of what's posted above don't work, I'd try different strings.
_________________
Henry Matthews

D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron