| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic I'm not one to start any $$$$ but . . . well maybe a little!
Reply to topic
Author Topic:  I'm not one to start any $$$$ but . . . well maybe a little!
Redd V


From:
Galax Va
Post  Posted 20 Jul 2014 7:43 am    
Reply with quote

I know there are a lot of steel players that play bass or started on bass,
so now the playing field just got bigger.
A friend sent me this photo, so I don't know who makes them or any dirt
I just though it was pretty interesting, so don't shoot the messenger!!

Redd


View user's profile Send private message Send e-mail
Stephen Cowell


From:
Round Rock, Texas, USA
Post  Posted 20 Jul 2014 7:55 am    
Reply with quote

Took me about a minute of looking at the funny bridge to realize... that thing's got pedals!
_________________
New FB Page: Lap Steel Licks And Stuff: https://www.facebook.com/groups/195394851800329
View user's profile Send private message Send e-mail
Dickie Whitley

 

Post  Posted 20 Jul 2014 8:00 am    
Reply with quote

...looks like four nylon tuners, wonder if they raise or lower, or just one function for each string. Would be interesting to know what each did and the underlying thoughts behind it.
View user's profile Send private message
Jon Light


From:
Saugerties, NY
Post  Posted 20 Jul 2014 8:08 am    
Reply with quote

I believe this is a clue (combined with something I heard from someone at NAMM).


View user's profile Send private message Send e-mail Visit poster's website
Redd V


From:
Galax Va
Post  Posted 20 Jul 2014 8:18 am     Namm
Reply with quote

I think thats where he took the photo.
View user's profile Send private message Send e-mail
Chris Bauer

 

From:
Nashville, TN USA
Post  Posted 20 Jul 2014 8:26 am    
Reply with quote

Yep - six, seven, and (maybe) eight string lap steels available with the same changer as well. Had a couple of resos set up with the same system.
View user's profile Send private message Send e-mail
Dickie Whitley

 

Post  Posted 20 Jul 2014 8:32 am    
Reply with quote

...I know how the pedals tend to feel on the larger gauges of strings on the PSG, I'm just wondering how stiff these pedals might be, or I'm I mis-thinking here.
View user's profile Send private message
Mark Eaton


From:
Sonoma County in The Great State Of Northern California
Post  Posted 20 Jul 2014 9:15 am    
Reply with quote

A new website is underway and you can see photos here of the other instruments here, it is not yet complete:

http://steelinstruments.com/

Rex Thomas started a similar thread, here is his post:

Quote:
Whoowee!! Okay, just got back from Summer NAMM, & of all going on, the following blew me away:

I'm coming down the last isle with lead gtrs. screaming left/right, then I happen on this incredible sight at a corner booth. Behold; a dobro, with pedals. A BASS, (set up as steel) with pedals, both 6 & 7 string lap steel shaped pedal steels. Yes, they were all "stand up" insts. Now if that wasn't a enough of a cool drink of water, on the 6 str. & bass steel was Zane King & Lonnie Bennett absolutely TAKING NO PRISONERS. Then they traded off; Lonnie went to the 6 str., Zane to the bass. Relentlessly HOT. One reason I couldn't figure out where to put this thread is the hot playing from the players or the innovative pedal insts.

Well to start, there it is folks, pedal dobro. How many guys on here have been pining for one of those? Now I fiddled with this one a little. It was in 'E', A/B pedals same as E9. And it has the same pull system as the steels, so tuning & pedal setup is up to your imagination. So there it is, the Jackson family have done it again, search no more.

Now I think Zane has a video with this new 6 stringer called the SlideKing. But I did get a close look, & it's quality all the way. Roller bridge saddles, p'ups sounded sweet. Zane worked it hard, & it's a stable inst., didn't flounce around on him at all. All I can really say about the 4-str. bass pedal steel is it was over the top, & both Lonnie & Zane WORKED IT.

I'm seriously coveting the red 7-stringer they had. I've wanted something of a "Don Warden" type steel, but the advantage with these is from what Zane shared with me is that they're AFFORDABLE, so that I can get one of these & have $$ left over for a D-10 or SD-10 with KL's out the bing bang so I don't have some builder saying I can't do this or I can't do that as I was trying to get a pedal steel to do double duty; stand AND sit. Well hey, fire out.

And to top that off, David, Harry, & Dawn were there, warm & welcoming, answered ALL my questions, & were glad to see me every time I passed by which was quite a few times.

Here's the website folks. When it opens, it's the 2nd/3rd/4th pages that show the SlideKing, Bass, & Dobro that I'm speaking of.
http://steelinstruments.com

I'm sure Zane will be on here to answer any further questions one may have.

David, Harry, Dawn, Zane, Lonnie; WAY TO RIP!!


What is interesting is though these new instruments are designed by Jackson, they are going to be manufactured by Roman Guitars, which I assume is Roman Guitars of Las Vegas, founded by the late Ed Roman.

Premier Guitar Magazine's comments below about the bass:

"... Jackson Steel Guitar blew a lot of minds at #SummerNAMM with what very well may be the world's first pedal-steel electric bass. Fashioned out of hard-rock maple, it uses a wide-frequency single-coil and four pitch-changing pedals to unleash harmonically rich tones that are like a cross between Western steel and an incredibly bell-like fretless bass. Street price will be around $2,000."
_________________
Mark
View user's profile Send private message Send e-mail
Lynn Fargo


From:
Fort Edward, NY
Post  Posted 20 Jul 2014 6:07 pm    
Reply with quote

Cool! Might even be able to get some work with one of these. Laughing
_________________
Sho-Bud Pro II Custom, GFI Ultra SD-10, Fender Pro Amp, Fender Mustang II Amp, Morrell 8-string lap, Epiphone 6-string lap, Galveston reso, etc.
View user's profile Send private message Send e-mail
David Mason


From:
Cambridge, MD, USA
Post  Posted 21 Jul 2014 5:16 am    
Reply with quote

What kind of strings? There's had to have been some pretty serious experimenting to get to something workable - it's hard to imagine normal stuff, like Rotosound roundwounds or D'Addario or Fender flats putting up with much whole-step or step-and-a-half stretching. Great way to increase the sales on bass strings! Laughing Not to mention chest and head armor, cause popping those things is going to be an event.
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 21 Jul 2014 5:31 am    
Reply with quote

Those of you with Facebook, have a look at Zane's page
https://www.facebook.com/photo.php?v=10202340687859942&fref=nf
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger
Zane King


From:
Nashville, TN
Post  Posted 21 Jul 2014 7:40 am    
Reply with quote

Good morning friends! I just jumped on the Forum here. I sort of figured there might be some news out here by now about what I was doing last week in Nashville's Summer NAMM show! LOL. I'm about to post a quick video on another thread here. Check it out.

Oh yeah, my world is getting interesting! Having fun is an understatement for me right now.
_________________
Zane King
Email: zaneking@me.com
View user's profile Send private message Send e-mail
Alan Brookes


From:
Brummy living in Southern California
Post  Posted 21 Jul 2014 9:28 am    
Reply with quote

That looks very interesting and has possibilities. I would love to hear a sample of its sound, and I shall be following its progress with interest. Cool
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron