| Author |
Topic: C6 Tuning on 6 String, Bar Slants? |
W. Johnson
From:
Oregon, USA
|
Posted 11 Jun 2014 9:01 am |
|
Lately, (as in the last week or so), I've been playing my 6 string lap steel in the C6 tuning. The more I use this tuning, the more I like it. I'm kind of baffled as to why anyone would think this tuning is 'dated'? Maybe there is a better tuning?
(Prior to using the C6 tuning, I have been playing my lap steel that has several palm levers to obtain various chords.)
I'm using the tuning: C - E - G - A - C - E. Because my fingers have arthritis in them, I have to play with a flat pick.
Anyway, I'm wondering about bar slants, and the various chords that can be obtained. In particular, what is a good way to get a dominant 7th chord, or M7 chord?
W. Johnson
_________________
I am on Facebook as Innovative Guitars. Photos of all my work in photo album. I no longer make lap steels, but still make tone bars. |
|
|
 |
Dave Broyles
From:
Olympia,WA USA
|
Posted 11 Jun 2014 9:45 am
|
|
| A very common variation of the C6 tuning is C6/A7, achieved by tuning your low C to C# (C#,E,G,A,C,E). This gives you the dominate chords on the lower 4 strings. |
|
|
|
W. Johnson
From:
Oregon, USA
|
Posted 11 Jun 2014 9:48 am
|
|
| Dave Broyles wrote: |
| A very common variation of the C6 tuning is C6/A7, achieved by tuning your low C to C# (C#,E,G,A,C,E). This gives you the dominate chords on the lower 4 strings. |
This looks interesting, I'll try it out.
Thanks,
Wayne
_________________
I am on Facebook as Innovative Guitars. Photos of all my work in photo album. I no longer make lap steels, but still make tone bars. |
|
|
|
Greg Moynihan
From:
Bremerton, Washington, USA
|
Posted 11 Jun 2014 12:31 pm
|
|
I like the sound of playing the third on the low E string and the minor 7th on the A string with a forward slant, for example, as a partial C7:
x
x
13
x
12
x
Then, you can do this nifty harmonic shortcut by shifting both notes one fret lower, which gives you an inversion of F7:
x
x
12
x
11
x
Also, if you have a round-nose bar, you can wedge the curve between the A and the high C string. If the size of the bar agrees with your string spacing, then, with practice, this will sound three notes in an F7:
x
12
12
x
11
x
And, finally, G7 can be obtained by moving this chord two frets higher:
x
14
14
x
13
x
Hope this helps! |
|
|
|
Edward Meisse
From:
Santa Rosa, California, USA
|
Posted 11 Jun 2014 1:24 pm
|
|
There are several books for 6 string C6 lap steel for sale here on the forum. Any one of them would be very helpful. I'm familiar with the De Witt Scott book. So I can recommend that outright.
_________________
Amor vincit omnia |
|
|
|
Joe Burke
From:
Toronto, Canada
|
Posted 11 Jun 2014 6:41 pm
|
|
| Thanks Greg! I've recently started playing C6 (moving from G). Playing slant chords is what makes playing steel great. |
|
|
|
W. Johnson
From:
Oregon, USA
|
Posted 11 Jun 2014 8:00 pm
|
|
Thanks guys for the help. I'll try some of the bar slants out. I'll also check out the book(s).
Wayne
_________________
I am on Facebook as Innovative Guitars. Photos of all my work in photo album. I no longer make lap steels, but still make tone bars. |
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
Posted 11 Jun 2014 10:42 pm
|
|
I use the Cma11 tuning. CEGBDF - Low to High. This tuning has a lot of slant options.
Last edited by Michael James on 19 Nov 2014 10:11 am; edited 1 time in total |
|
|
|
Mike Neer
From:
NJ
|
Posted 12 Jun 2014 4:27 am
|
|
Some super cool and useful slants for a Dom 7 chord with the 7th and root on the 1st string:
| Tab: |
---6-------------8-----------
---------------------------
---7-------------7---------
---------------------------
---8-------------6---------
----------------------------
|
These are both C7 chords. They are also very easy to play.
_________________
Links to streaming music, websites, YouTube: Links |
|
|
|
Greg Moynihan
From:
Bremerton, Washington, USA
|
Posted 12 Jun 2014 4:13 pm
|
|
| Mr. Neer -- Those slants are so completely awesome, thank you sir! |
|
|
|
W. Johnson
From:
Oregon, USA
|
Posted 12 Jun 2014 7:45 pm
|
|
I watched your videos, very informative and you explain it well. I also am looking at the PDF files. All good stuff. I will have to tune one of my guitars to this tuning and experiment with it.
_________________
I am on Facebook as Innovative Guitars. Photos of all my work in photo album. I no longer make lap steels, but still make tone bars. |
|
|
|
Michael James
From:
La Crosse, Wisconsin, USA
|
|
|
|
