Kjell Ohlsson
From:
Mora, Dalecarlia, Sweden
|
Posted 11 May 2014 8:46 am |
|
...so maybe someone out there can give me some advise.
Current situation is RKR lowers 2nd one half (1/2) and one whole 1/1, but also 9th a half tone.
RKL raises the 1st a half (1/2) and a whole (1/1) and 2nd a half (1/2) as of the 7th a half (1/2)
My problem is, I want the Inner RKL lever to raise the 7th a whole (1/1)tone. I can accept, the the RKR to also raise 7th a whole as it raises the 7th a half. But that would need some more parts, I assume.
I do have a complete pull train assembly just enough to reach the InnerRKL but I can´t get that
whole tone raise.
Someone please, come up with some suggestions.
Does the bell crank play a significant part in reaching the whole tone or what?
Maybe I`m into mission impossible, if so, please let me know.
I hope you can understand my explanation and what I´m aiming at.
Regards
Kjell
_________________
Black Emmons L LGII D10 9+6,BOSS RV3, TubeFex, Fender Steel King, Hilton & Goodrich vol.ped, Fender 60th Anniversary Telecaster, Fender Twin Reverb 65 ReIssue, Volvo V70, |
|
