| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic pedal throw vs. string guage
Reply to topic
Author Topic:  pedal throw vs. string guage
Gino Iorfida

 

From:
Pittsburgh, Pennsylvania, USA
Post  Posted 31 Oct 2002 2:16 pm    
Reply with quote

Ok, newbie type question here, but say i went from a .017 for the 5th and .020 plain on the 6th string, and went to a slightly heavier guage (i.e. .018 5th, and .022 plain 6th) will I have to lengthen, or shorten the throw for pedals affecting these strings(i.e. will a heavier string require MORE or LESS travel to accomplish the same raises/lowers).

Thanks in advance..... I know this should be common sense but the ol' brain isn't working well these days *laugh*
View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 31 Oct 2002 2:54 pm    
Reply with quote

I don't think the gauge changes you mentioned would have too much affect on the throw. I think you can get by with just adjusting the tuning nuts.
Erv
View user's profile Send private message Send e-mail
Jim Smith


From:
Midlothian, TX, USA
Post  Posted 31 Oct 2002 3:09 pm    
Reply with quote

The larger gauges will take a hair less travel, maybe 1/2 to 1 turn of the tuning wrench.
View user's profile Send private message Send e-mail
richard burton


From:
Britain
Post  Posted 1 Nov 2002 11:06 am    
Reply with quote

Jim,
are you sure?
In my experience, larger gauges tuned to the same pitch as thinner gauges, require more travel to raise/lower a half/full tone.
View user's profile Send private message Send e-mail
Bobby Boggs

 

From:
Upstate SC.
Post  Posted 1 Nov 2002 11:45 am    
Reply with quote

I had always believed as Jim.I use a .013 for my F# to G# raise.I broke the string and had no 13's only a .012.The 12 pulled 40 cents sharper than the 13.I've had the same experience when I had to use a 13 in place of a .014 for the 4th string.Now I don't like a 13 for a 4th string.But it made the pedal softer.As did the 12 for a 1st string.------bb
View user's profile Send private message
Jim Smith


From:
Midlothian, TX, USA
Post  Posted 1 Nov 2002 12:17 pm    
Reply with quote

Granted I haven't done a lot of experimenting with this, so maybe it varies. For me on the G#'s-A, a .022P has a shorter stroke than a .020P and a .012P has a shorter stroke than a .011P.
View user's profile Send private message Send e-mail
Bobby Lee


From:
Cloverdale, California, USA
Post  Posted 1 Nov 2002 12:22 pm    
Reply with quote

Right. The heavier strings tune up tighter, and require less travel. Typically, the difference is small enough that you can handle it with the tuning nut.

------------------
Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (F Diatonic), Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6), Roland Handsonic

[This message was edited by Bobby Lee on 01 November 2002 at 12:23 PM.]

View user's profile Send private message Visit poster's website
Earnest Bovine


From:
Los Angeles CA USA
Post  Posted 1 Nov 2002 12:27 pm    
Reply with quote

A heavier string requires more travel here.
View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron