Gregg McKenna
From:
South Windsor, Connecticut, USA
|
Posted 14 Apr 2014 9:21 am |
|
Assembled body with neck and fretboard ready to add your choice of hardware and a finish. (hardware not included). Nice opportunity to finish a high quality 7 string yourself at your leisure.
Birch body, cream colored bindings
Mahogany neck
Rosewood fretboard 25" scale
The Fretboard is pre-drilled to use (6) 5/16" inlay dots in the middle and (4)1'4" inlay dots at the end of the board. I can install the frets at no extra charge or leave them uninstalled if you prefer to do additional inlay work.
(Guitar and neck sanded to 150 grit)
Includes ebony nut and 1 piece ebony capped maple bridge insert.
You'll need to glue on the neck, fretboard, sand to 320 grit, install inlays, apply a finish, and mount hardware and tuners, fit the insert to the spider bridge and setup the guitar.
You'll also need to use the offset spider bridge (Beard PN#OSB-187) that uses the 1 piece bridge insert for the addition of the middle string. The resonator opening/scale was located specifically to use this spider bridge.
$350.00 plus shipping
Please email if interested.
_________________
http://mckennaresonatorguitars.com/ |
|
