| Author |
Topic: WTB: MSA Classic D-10 Parts - *Please Close* |
Bob Isaac
From:
Leavenworth, Kansas, USA
|
Posted 8 Apr 2014 12:49 pm |
|
1) I am in need of two (2) complete knee lever assemblies, including the levers, mounting brackets and linkage mechanisms, with associated rods and pull pins.
2) I also need two (2) pedal assemblies, including pedals, connectors and linkages (everything from the pedal to the cross rod).
3) A nice handful of the brass pull pins.
Last edited by Bob Isaac on 30 Apr 2014 8:28 am; edited 1 time in total |
|
|
 |
Paul Wade
From:
mundelein,ill
|
Posted 11 Apr 2014 5:27 am msa parts
|
|
phillp ogel can make parts for you. he is on the form
email:phillipogle4771@gmail.com
p.w
I had a post on my replacement parts and somehow got deleted.ldon't know., but I can supply you with quality parts from knee lever kits. Bell cranks, return sprinss(adjustable) pull rods & barrels, to changers. changers are not msa, but you can look at my post under changer. Pm or call 828 442 2011 |
|
|
|
Mike Spaeth
From:
Springdale, Arkansas
|
Posted 11 Apr 2014 5:04 pm Msa
|
|
| PM sent |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 12 Apr 2014 2:31 am
|
|
Bob, if you need right-moving knees, I like Bruce Zumsteg levers instead of the OEM style. The reverser is part of the bracket, and doesn't screw to the apron.
In addition to Phil, there's also Jim Palenscar at www.steelguitars.me and Tom at www.songwriter.com/bradshaw
If you need help, I'm just an hour down the road.
But left right and vertical knees are all different kits.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Steve Goodson
From:
South Carolina, USA
|
Posted 23 Apr 2014 1:15 pm Msa Parts
|
|
I HAVE A FEW PARTS LEFT OVER FROM MY MSA D-10 THAT I NO LONGER HAVE. LET ME KNOW IF YOU CAN USE THEM.
 |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 23 Apr 2014 2:53 pm Guitar Parts
|
|
Steve Goodson,
Those are Emmons parts and I'll buy them from you. I just sent you an email.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Bob Isaac
From:
Leavenworth, Kansas, USA
|
Posted 23 Apr 2014 7:21 pm
|
|
Thanks for the offer Steve, and thanks for the ID Lynn. I was scratching my head since I couldn't find much under my MSA that resembled those parts!
And FYI, I am still in need of the RKR lever and connecting bolt, nut and washer.
I've received all of the other needed parts from a forum member via this thread.
And Lane, thank you for the good advise and the kind offer. I might take you up on it in the near future! |
|
|
|
Bob Isaac
From:
Leavenworth, Kansas, USA
|
Posted 30 Apr 2014 8:29 am Have All the Parts
|
|
Thank you everyone, I now have all of the parts I was searching for.
Please close this thread. |
|
|
|
