| Author |
Topic: Wide for Narrow |
Jimmy Gibson
From:
Cornwall, England
|
Posted 5 Apr 2014 7:50 am |
|
I have been told that the narrow Sho-Bud pedals are not interchangeable with the wide Bud pedals, is this true because I need to know before I buy narrow S/bud pedals to replace my WIDE pedals from my D12 PRO2 Custom late seventies
Thanks Jimmy.
Last edited by Jimmy Gibson on 14 Apr 2014 3:21 am; edited 5 times in total |
|
|
 |
Thomas Butler
From:
Robbinsdale, MN
|
Posted 5 Apr 2014 8:53 am
|
|
I swapped the pedals on my LDG - went from narrow to wide - without any issues.
_________________
LDG and a Twin Reverb - what more does a guy need? |
|
|
|
James Morehead
From:
Prague, Oklahoma, USA - R.I.P.
|
Posted 5 Apr 2014 8:42 pm
|
|
As you can see, the typical wide Shobud floor pedal is thicker where the axle goes through--and if that will clear your Super Pro pedal bar, you can probably make it work. A metal bandsaw will cut to the length you need for your axle arrangement.
_________________
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net |
|
|
|
James Morehead
From:
Prague, Oklahoma, USA - R.I.P.
|
Posted 5 Apr 2014 9:07 pm
|
|
I'd say yes, the wide will fit on a Super Pro pedal bar with plenty of clearance. And a pic of a narrow floor pedal for comparison.
_________________
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net |
|
|
|
