| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Roland Cube 80GX & Volume Pedals
Reply to topic
Author Topic:  Roland Cube 80GX & Volume Pedals
Robert Rumbley

 

From:
Apollo Beach Florida, USA
Post  Posted 5 Mar 2014 6:38 am    
Reply with quote

Hello All
Does anyone know if you can use a volume pedal other than the Roland brand with the cube 80gx amp? The documentation is pretty sketchy about this. If any pedal will work, do you need the GA-FC foot controller or can you just plug it in to the FS input on back of the amp or maybe the boss FS-6 that came with it? Thanks in advance for your help.
View user's profile Send private message Send e-mail
Brad Bechtel


From:
San Francisco, CA
Post  Posted 5 Mar 2014 7:26 am    
Reply with quote

Are you talking about a volume pedal or a foot switch? I use a Goodrich volume pedal between my steel guitar and my Roland Cube 80x amp. For a foot switch, I've been using an old Crate foot switch, but recently bought the Roland FS-5 foot switch so I could have a longer cable.
_________________
Brad’s Page of Steel
A web site devoted to acoustic & electric lap steel guitars
View user's profile Send private message Send e-mail Visit poster's website
George McLellan


From:
Duluth, MN USA
Post  Posted 5 Mar 2014 7:27 am    
Reply with quote

I use a Telonix VP, sounds great. I also use a foot switch from a NV400 with my Roland 80XL. The only problem, if one feels it's a problem, is to turn effect on/off or switch the channel depending on where you plug into to is you have to click it twice to either turn it on or off.

Geo
View user's profile Send private message Send e-mail
Robert Rumbley

 

From:
Apollo Beach Florida, USA
Post  Posted 5 Mar 2014 7:49 am     gx and vlomue pedals
Reply with quote

Thanks for the advise guys...I bought a volume pedal from Doug Ernest (Stage One), but haven't gotten it yet...so sounds like I can use it with the gx. Just plug it into the input jack on top of the amp.
thanks again for the help
View user's profile Send private message Send e-mail
Bryan Bradfield


From:
Lethbridge, Alberta, Canada.
Post  Posted 5 Mar 2014 11:42 am    
Reply with quote

George McLellan's scenario indicates that he is using a latched footswitch for switching. On the other hand, an unlatched footswitch will require only one press. Interestingly, the unlatched Roland footswitch is configurable so that the change occurs upon pressing the footswitch, or upon releasing the pressed footswitch.
View user's profile Send private message Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron