| Author |
Topic: adjust a newer model Hilton?? |
Terry Sneed
From:
Arkansas,
|
Posted 13 Feb 2014 5:13 pm |
|
I have a newer model Hilton (detachable wallwart) that comes on TO TO quick. With just minimum movement of the pedal, it Blares almost wide open. Any adjustment that can be made?
terry |
|
|
 |
Jack Stoner
From:
Kansas City, MO
|
Posted 13 Feb 2014 5:26 pm
|
|
| Contact Keith Hilton. |
|
|
|
Carl Kilmer
From:
East Central, Illinois
|
Posted 13 Feb 2014 5:47 pm
|
|
There should be a small pot on the bottom left side.
That is the ajustment for that. Turn it carefully, if
you turn it past the stop point, you'll ruin the pot.
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|
|
|
Jim Eller
From:
Kodak, TN (Michigan transplant)
|
Posted 13 Feb 2014 6:08 pm
|
|
Terry,
I have one of the new Hiltons(Pro Guitar) and mine has an adjustment knob on the right side to determine when it starts to produce volume.
Here is a demo.
http://www.youtube.com/watch?v=_2PPWdJbWso
JimE |
|
|
|
Terry Sneed
From:
Arkansas,
|
Posted 13 Feb 2014 9:19 pm Hilton
|
|
Thanks guys. Jim, I don't have the Pro Guitar model which has the knob on the out side, but maybe the screw on the bottom like Carl is talkin about will help. But actually, I think I need more stiffness in the pedal, and not sure if there's an adjustment for that. I thought maybe the two allen head screws on each side just needed tightening a little but they won't tighten.
I'll email Keith and see what he says. Thanks
terry |
|
|
|
