| Author |
Topic: Hilton Pedal Repair. |
Sam White R.I.P.
From:
Coventry, RI 02816
|
Posted 23 Jan 2014 5:27 am |
|
Where can I get my Hilton Pedal repaired. There is nothing wrong with it except it is one of the older version the cord is connected to the side of the pedal. I want to be able to unplug it and be able to wrap the cord up. The Cord that it was built with is stiff as a board.Any help will be appreciated.
Sam White
_________________
Dynalap lap 8 String Lap Steel Fender frontman 25B speaker changed Boss TU-12H Tuner.Founder and supporter of the Rhode Island Steel Guitar Association Founder of the New England Steel Guitar Association and the Greeneville TN Steel Jams and now founder of the North Carolina Steel Guitar Jams. Honorary member of the Rhode Island Steel Guitar Association,Member of The New England Steel Guitar Association.
Member of the Florida Steel Guitar Club,and member of Mid Atlantic Steel Guitar Association |
|
|
 |
Marco Schouten
From:
Amsterdam, The Netherlands
|
Posted 23 Jan 2014 5:47 am
|
|
I would contact Keith Hilton.
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo |
|
|
|
Joe Naylor
From:
Avondale, Arizona, USA
|
Posted 23 Jan 2014 6:21 am Keith
|
|
Keith will take care of you and you will be pleased.
Joe Naylor
www.steelseat.com
Announcer / Emcee
_________________
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP |
|
|
|
Jack Stoner
From:
Kansas City, MO
|
Posted 23 Jan 2014 6:59 am
|
|
That will have to be modified and maybe even changed over to the current plug in power supply type. If that is the case it will take a lot of modification.
I have one of the older types and never really had a problem with the connected cord. I also have one of the newer models with the plug in power cord. Both work equally well.
But, as noted, the ONLY place to get it modified (not repaired in this case) is to send it to Keith Hilton. However, contact him first and explain what you want and get the quote on what it will cost.
417-581-4158 |
|
|
|
