Lawrence 710 Question

Glenn Austin · From: Montreal, Canada

I just got a Lawrence 710 for my Emmons. What I need to know is which wire is the hot wire, black or white, and in which direction do I put the pickup, meaning the end where the wires come out, should they be nearest me or away from me. I know both of these things affect absolute phase. Thanks in advance.

jerry wallace · From: Artesia , NM (deceased)

Glenn , black is the ground, white is the lead..I dont think it will matter which end you mount it from..But I always mounted them with the leads closest to the center of the PSG..Main reason being having enough wire to reach the switch..Depending on the wire length/distance to switch , you may not have a choice anyway..

------------------
Jerry Wallace-2001 Zum: D-10,8+6, "98 Zum: D-10,8+8,Nashville 1000,Session 500 ,Session 400 head only amp,Tubefex,ProfexII, Artesia, New Mexico
http://communities.msn.com/jerrywallacemusic http://www.jerrywallacemusic.com

[This message was edited by jerry wallace on 31 May 2002 at 04:21 PM.]

Glenn Austin · From: Montreal, Canada

Thanks Jerry.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: