| Author |
Topic: Part Number for the Original AB Pots????? |
David Hartley
|
Posted 28 Dec 2005 10:03 am |
|
| Has anyone got this part number in its entirity ( Sho Bud Pedal) I may have a source for these...Watch this space... |
|
|
 |
David Hartley
|
Posted 28 Dec 2005 10:04 am
|
|
| Including shaft length etc.... |
|
|
|
Kevin Mincke
From:
Farmington, MN (Twin Cities-South Metro) USA
|
Posted 28 Dec 2005 11:43 am
|
|
Allen Bradley JA1N200P504AA 500K Type J
2.00" shaft
JA1N056P504AA
.o56" shaft
(P/S) plain or slotted shaft
Clarostat bought out A/B sometime in the late 80's early 90's. I beleive th numbers remained the same for sometime however.
Pots must be Type J, 500ohm, AA=(logarithmic taper)
|
|
|
|
David Hartley
|
Posted 29 Dec 2005 3:01 am
|
|
| Sorry guys, my contact has just got back to me and has almost every other value apart from the 500Kohm....This supply must have been exhausted by previous steel guitarists contacting him.... |
|
|
|
Keith Cordell
From:
San Diego
|
Posted 29 Dec 2005 9:27 am
|
|
The 1meg pots would be useful to me, as would the 250k and 100k. Mind hooking me up?
|
|
|
|
Brad Sarno
From:
St. Louis, MO USA
|
Posted 29 Dec 2005 9:28 am
|
|
Just a tip. If you happen to use a buffer like a MatchBox, Hilton Sustain, Black Box, etc. then you can get away with a wide range of pot values. You could use a 100kA, a 250kA, or probably many other values. It's only when you have no buffer that the 500k becomes more critical as it becomes the main "load" value on the pickup. So if you use a buffer, look for the same taper, same J-type but in values from maybe 50k to 500k.
Brad
www.steelguitarblackbox.com |
|
|
|
