| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Question for short players
Reply to topic
Author Topic:  Question for short players
Allen

 

From:
Littleton, CO USA
Post  Posted 31 Mar 2002 5:57 pm    
Reply with quote

Please, no short jokes............
I'm 5'6"+ a little. Most seats were a little too tall and my legs would feel pinched under the thigh. So when I had my "Pack-a-Seat" made by Kenny, we decided to make it a about 3/4" shorter then standard. It fits wonderful.
Now my question...Am I better off to lower the front legs of my steel or to cut off the pedal rods and lower the entire guitar so that my forarms, wrists and hands are at a more comfortable postition relative to the guitar necks?
Anyone else been down this road?

------------------
Allen Harry
Mullen D-10, 8 & 6
Nashville 1000


View user's profile Send private message Send e-mail
Winnie Winston

 

From:
Tawa, Wellington, NZ * R.I.P.
Post  Posted 31 Mar 2002 6:03 pm    
Reply with quote

I'm about 2" taller. My seat is about an inch lower AND my steel is about an inch lower.
I had it made that way, and I love it.
If it is a hgood steel, and you plan on keeping it, the surgey would be worth it. You can then feel comfortable at it.

Winnie
View user's profile Send private message Visit poster's website
Bob Blair


From:
Edmonton, Alberta, Canada
Post  Posted 31 Mar 2002 6:21 pm    
Reply with quote

By all means get the "surgery" done. Dick Meis is in your neck of the woods, and he could do it for you in a jiffy I bet, as no doubt could some others.
View user's profile Send private message Send e-mail
Peter

 

Post  Posted 1 Apr 2002 8:32 am    
Reply with quote

I am the same size. I prefer to sit higher. This allows me to push the pedals down in a more positive way and there is not such a sharp angle when my heels are on the floor and my toes are up. It is easier on the muscles of the calves. I use a drum throne (21inch high) and I sit on my bum, not on my thighs.That means, the edge of the drumstool is more or less in the "fold" where my buttocks join my thighs. So there is no pinching or lack of blood flow. I tried lower seats but it feels awkward. My PSG is huge and if I sit higher I dont feel lost behind it. Also, my arms are more or less horizontal this way, with my hands slightly down. I also have a better overall view of the fretboard. I have tried shorter legs and lower seats, but my pedal pushing suffers. Maybe you can borrow a drumthrone from someone to try it. Obviously it is a matter of preference.
Boo Bernstein

 

From:
Los Angeles, CA
Post  Posted 1 Apr 2002 9:25 am    
Reply with quote


I have the same problem -- I'm small but mighty! The biggest problem I face is the vertical knee lever -- I literally have to lift my foot off the pedals to activate it. It also makes the split tuning impossible. I have a set of the smaller legs and rods and I go back and forth trying to get used to the feel. It's just something that I've gotten used to after all these years ...

Boo
View user's profile Send private message Send e-mail
Michael Johnstone


From:
Sylmar,Ca. USA
Post  Posted 1 Apr 2002 11:13 am    
Reply with quote

Definately have the modification done.I'm average height but this applies to anyone.Ideally,the plane of the guitar strings should be level in every respect.If my guitar's gonna be set up in a given place for a while,I'll adjust mine front to back and then put the bar on the strings and adjust it end to end until the bar just sits on the strings without rolling.It makes the thing SO much easier to play when you're not fighting gravity.Frankly I don't know how Junior Brown plays as well as he does at a 45 degree angle like that. -MJ-
View user's profile Send private message Send e-mail
richard burton


From:
Britain
Post  Posted 1 Apr 2002 12:11 pm    
Reply with quote

Allen,
Read my reply to a similar topic which is on 'Pedal Steel' at this very moment.
Sir Richard.
View user's profile Send private message Send e-mail
Tim Harr


From:
Dunlap, Illinois
Post  Posted 2 Apr 2002 11:04 am    
Reply with quote

I am 5'6" and all I had to do was have my steel legs and pedal rods shortened by 1". Everything is in fine reach now.

My Rollans pack a seat is standard height.

Good Luck!

Tim
View user's profile Send private message Send e-mail
Shorty Coltey

 

From:
Lake City, GA, USA
Post  Posted 5 Apr 2002 12:34 pm    
Reply with quote

I'm among those at 5'2" and I deffently had to cut the legs and rods off an inch and a 1/2 and also was lucky to purchase a pack seat that someone else had shortened. It is about impossible to play comfortable with one that is to high. I can't set at one at a show and play because of my height and most are set at standard height. I do not know if you need to have a second standard set of legs and rods in the event you wanted to sell yours. I'll never learn all there is to know on my MSA D-10 SS so have no plans of selling it and what do I care when I'm gone. DOING MORE DOBRO THAN STEEL NOW. I love the forum as there is always something going on and very informative. Shorty LBL (Little But Loud)
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 5 Apr 2002 2:28 pm    
Reply with quote

I would advise having your seat rather high. If you can play downhill, you'll find that you can play faster licks and, in addition, your gas mileage improves considerably.
Uff-Da
View user's profile Send private message Send e-mail
Allen

 

From:
Littleton, CO USA
Post  Posted 5 Apr 2002 3:13 pm    
Reply with quote

Hey Y'all,

Thanks for the many great replies. Looks like I will call Del and see if he can get me a set of legs and rods about 1" shorter. Not sure I want to cut the originals off, as Shorty said, "I do not know if you need to have a second standard set of legs and rods in the event you wanted to sell yours", It is worth considering.

Thanks, Allen

------------------
Allen Harry
Mullen D-10, 8 & 6
Nashville 1000


View user's profile Send private message Send e-mail
Larry Miller

 

From:
Dothan AL,USA
Post  Posted 5 Apr 2002 3:43 pm    
Reply with quote

http://hometown.aol.com/laredo1010/myhomepage/profile.html you think you've got problems?
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron