| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Amp Setting for Zum
Reply to topic
Author Topic:  Amp Setting for Zum
Sonny Jenkins


From:
Texas Masonic Retirement Center,,,Arlington Tx
Post  Posted 26 Mar 2002 2:57 pm    
Reply with quote

I've just become the proud owner of a new (used) Zum S-12 Universal. When I plug into my Nash. 400, I get a TOTALLY different sound than on my Carter,and can not seem to find a good setting. Can someone give me their settings. The Zum has a stock Zum pick-up.
View user's profile Send private message Send e-mail
Sonny Jenkins


From:
Texas Masonic Retirement Center,,,Arlington Tx
Post  Posted 27 Mar 2002 6:35 am    
Reply with quote

Com'on guys, I need some feedback (no pun intended)
View user's profile Send private message Send e-mail
Dennis Detweiler


From:
Solon, Iowa, US
Post  Posted 27 Mar 2002 6:46 am    
Reply with quote

Hi Sonny...I've been playing a U-12 Zum since 1983. I play through two session 400's. Both models from the 1970s. You can try these settings, but the older 400s aren't parametric:
presence: 10 o'clock to 2 o'clock
treble: 10 o'clock to 2 o'clock
mid: around 8 or 9 oclock
shift: 11 to 1 o'clock
bass: 3 o'clock to full on
I had a stock pickup until 2 yrs ago. I installed a GeorgeL 12-1
Dennis
View user's profile Send private message Send e-mail
Jay Jessup


From:
Charlottesville, VA, USA
Post  Posted 27 Mar 2002 7:16 am    
Reply with quote

Sonny,
Here's the procedure I follow whenever I am searching for tone with a new guitar combination. First set everything to zero (straight up) then dial in the shift to about 10 O clock and cycle through the paramid frequencies untill you get something that sounds reasonable to you, yoy may have to use more or less cut(shift) but I would be real surprised if you had to have that on the plus side. Once you get that where you are happywith it then you can season to taste with the bass, treble and presence. Good Luck
View user's profile Send private message Send e-mail
Gerald Menke

 

From:
Stormville NY, USA
Post  Posted 27 Mar 2002 9:33 am    
Reply with quote

Hi Sonny,
I've played a Zumsteel S-10 for two years now, and my only criticism of the guitar is that the pickup is a little strong in the mids for my taste; through some Fenders it sounds great, but in some rooms, it sounds kinda lousy through the Evans SE 200. Other rooms it sounds really great, punchy and present. Sometimes I use a Lil'Izzy which boosts the highs and brings the mids under control. This is truly nuts, but I swear it sounds better with a 1" bar than a 7/8". Compared to a Zum a Franklin sounds "scooped" to my ears. Does any of this sound familiar?
G
View user's profile Send private message Send e-mail
John Knight

 

From:
Alaska
Post  Posted 27 Mar 2002 10:41 am    
Reply with quote

Sonny, Jay has a good approach. I start with all the knobs set at zero. I start with the mids. The pyramid I set at 750 to 800 then the mids to -12 -15 the lows +3 highs 0 - +3 and presence +2 - +6 depending on the size of the room. Sound is a funny thing. Try this, set your amp up behind you and get a setting your happy with and then move the amp out in front of you about 6-8 feet. See what you get. Like I said sound is funny stuff

------------------
D 10 Thomas with 8&6
Nashville 400 and Profex II
81' Fender Twin JBL's
Asleep at the Steel
View user's profile Send private message Send e-mail
Sonny Jenkins


From:
Texas Masonic Retirement Center,,,Arlington Tx
Post  Posted 27 Mar 2002 12:05 pm    
Reply with quote

Thanks a million,,,these sound like some good approaches. I knew I could count on ya'll.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron