| Author |
Topic: ZB Custom, Could use some advice |
Barton Merle-Smith
From:
Vermont, USA
|
Posted 25 Mar 2002 8:12 pm |
|
Hello everyone. I am new to the pedal steel and could use a little help and direction. I have come across a ZB Custom S-10 with 3 pedals and a knee lever. I thought it would be a good place to start. The guitar is missing one of the bridge round changer pieces that the string goes over. Looks like the end of an open end box wrench with the handle cut off and rounded.(How's that for terminology?) Anyway I have no idea where to get any parts for this guitar. Can anyone here steer me in the right direction? I could also use some advice as to gauge and type of strings. The condition of the guitar is fine other than that. Any help would be greatly appreciated. Ann Fabian from Carter was the one who suggested I start here. Thank you all in advance.
Regards,
Barton merle-Smith |
|
|
 |
Glenn Austin
From:
Montreal, Canada
|
Posted 25 Mar 2002 8:34 pm
|
|
| There's a guy in the buy and sell section who has ZB parts. Just scroll down the list. |
|
|
|
B. Greg Jones
From:
Middleport, Ohio USA
|
Posted 26 Mar 2002 2:23 pm
|
|
Barton, I have the top rollers for the changer finger that you need. Email me a parts list and I can get you fixed up!!
Greg |
|
|
|
smike
From:
oakland, ca
|
Posted 26 Mar 2002 5:26 pm
|
|
and, of course, i have an immaculate one for sale... check the buy/sell area, or http://www.5happy.com/zb/
i think you will find that zb's are really tricky to work on...
good luck,
smike |
|
|
|
Barton Merle-Smith
From:
Vermont, USA
|
Posted 27 Mar 2002 5:56 pm
|
|
Thank you for the help so far. It is reassuring to know that there are so many folks out there willing to lend a hand.
Regards to all,
Barton |
|
|
|
smike
From:
oakland, ca
|
Posted 27 Mar 2002 6:52 pm
|
|
oops... my zb just got bought. good luck with yours!
smike |
|
|
|
