| Author |
Topic: ZB "fins" tailpiece |
Ben Elder
From:
La Crescenta, California, USA
|
Posted 27 Jul 2013 5:58 pm |
|
A previous owner sawed one in two on a recently-acquired S-11 (cut was along a line just behind the back edge of the pickup.) Supposedly the case wouldn't close with the fins resting on the spacer on the floor of the case...?
_________________
"Gopher, Everett?" |
|
|
 |
Ben Elder
From:
La Crescenta, California, USA
|
Posted 28 Jul 2013 4:59 pm
|
|
Saw marks visible in the wood from where the Genius Award winner cut through the tailpiece.
_________________
"Gopher, Everett?"
Last edited by Ben Elder on 10 Aug 2013 2:24 pm; edited 1 time in total |
|
|
|
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 28 Jul 2013 8:42 pm
|
|
Sorry Ben, mine are 10 string. You need an 11 string tail plate.
Last edited by Kevin Hatton on 2 Aug 2013 9:44 am; edited 1 time in total |
|
|
|
Ben Elder
From:
La Crescenta, California, USA
|
Posted 1 Aug 2013 7:08 pm
|
|
My 11-string tailpiece is larger than Kevin's 10-string ones.
Bump (and SOS).
_________________
"Gopher, Everett?" |
|
|
|
Bob Hamilton
From:
California Central Coast
|
Posted 4 Aug 2013 4:28 am Plate
|
|
| Hey Ben, I'd look into having it welded and polished, shouldn't be a problem for a good welding shop to repair it. FWIW, the tail piece on the 11 string neck on my 11/10 ZB (0008) is the same size as the 10 string neck. Good luck with the project, BH |
|
|
|
