| Author |
Topic: Emmons neck switch wiring Please Close Thanks |
billy tam R.I.P.
From:
baton rouge, louisiana
|
Posted 20 May 2013 2:00 pm |
|
Need a wiring drawing to get this new switch wired correctly. I have the two pickups right I think but need help with the jack wiring and the cross wiring on the interior connectors.
Thanks in advance,
Billy
Last edited by billy tam R.I.P. on 21 May 2013 8:45 am; edited 1 time in total |
|
|
 |
Chris Lucker
From:
Los Angeles, California USA
|
Posted 20 May 2013 3:24 pm
|
|
Before anyone can give you a wiring diagram with certainty it will work, you need to show us where the tabs are on your switch. Did you get a switch that matched the original Emmons switch, or one that had differently configured tabs?
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
billy tam R.I.P.
From:
baton rouge, louisiana
|
Posted 20 May 2013 4:44 pm switch
|
|
Chris, Thanks for the response. The switch matches the old one. I started wiring the terminals one by one but somehow unsoldered the jack wires by mistake. there was a ton of old solder in places so the exact wiring got puzzling and I would like to get it right the first time.
Billy |
|
|
|
Chris Lucker
From:
Los Angeles, California USA
|
Posted 20 May 2013 11:44 pm
|
|
Here is the schematic straight from Emmons and an alternative I have drawn for you. Both use the same switch layout. Make sure you have the same layout.
_________________
Chris Lucker
Red Bellies, Bigsbys and a lot of other guitars. |
|
|
|
billy tam R.I.P.
From:
baton rouge, louisiana
|
Posted 21 May 2013 3:09 am switch
|
|
Thanks Chris, Once again you come to my rescue. That is exactly what I was looking for. If you ever get close to south Louisiana let me know and I will take you to some of my lesser known eateries for a real taste of Cajun/Creole/fabulous cuisine.
Billy |
|
|
|
