Goodrich Pedal Repair Chicago Area

Richard Alderson · From: Illinois, USA

For Illinois Steelers - Where can I go to have my Goodrich volume pedal installed with a new pot? I am willing to buy a kit on-line and let somebody who has done this before replace the pot, or buy the pot from the repair shop that does the job. Write private message if you prefer.

_________________
Derby SD-10 5x6; GFI S-10 5x5; GFI S-10 5x5; Zum D-10 8x7; Zum D-10 9x9; Fender 400; Fender Rumble 200; Nashville 400; Telonics TCA-500.

David Nugent · From: Gum Spring, Va.

Richard...Quality replacement pots can be purchased from Forum members Jerry Roller and Tom Bradshaw among others. There are detailed instructions for replacing the old unit on Greg Cutshaw's site (also a Forum member). The process is fairly simple as long as you possess rudimentary soldering skills and make special note of how the string is wound on the pulley prior to removing the old pot. If the string is not rewound correctly, the pedal may not function properly.

Richard Alderson · From: Illinois, USA

Thanks David - I know its supposed to be a simple fix, but still... all apprentices perform better with a master at their side; thought I would try and see if there was anyone who has a shop and I could pay them for the pot and the work both; If I end up doing it myself I'll let you know how many times it took to wind the little string corrrectly !
_________________
Derby SD-10 5x6; GFI S-10 5x5; GFI S-10 5x5; Zum D-10 8x7; Zum D-10 9x9; Fender 400; Fender Rumble 200; Nashville 400; Telonics TCA-500.

Craig Schwartz · From: McHenry IL

Richard , How close is McHenry to you? Get the pot Whoa!

and I`ll help you with it Laughing

_________________
SO MANY LURES, SO LITTLE TIME....

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: