| Author |
Topic: Anyone tried the Quilter Steelair 15" speaker? |
Keith Cary
From:
California, USA
|
Posted 3 Apr 2017 7:09 am |
|
I'm thinking of buying just the driver. I love my Altec 418b but it's heavy. Pat Quilter says he designed his Eminence/Quilter 15" neo with the Altec in mind. They cost about $220, weigh about 6 lbs, are almost as efficient as the Altec but handle 300 watts. But I'd like to hear other opinions.
K |
|
|
 |
Chuck Blake
From:
West Virginia, USA
|
Posted 3 Apr 2017 10:41 am
|
|
Keith I use either an Eminence SP15C or a Sica with my Quilter Rack Mount model. I like both of them, both 15" and both neo lite weight speakers. The Eminence has a little more highs and the Sica is a little more grit or grainier.
I have never tried the OEM speaker found in the Steelaire or the PRO models.
Hope this helps
Chuck
_________________
2010 Rains 3x5 SD10, 2006 Rains 3x5 SD10 Powered by Quilter Tone Block 202 and 15' and 12' Custom Speaker cabs |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 5 Apr 2017 9:23 am Quilter Speaker
|
|
Keith,
I once had a Quilter Steelaire Pro model. I decided to A/B the stock Eminence speaker with a Telonics 15" (in one of their cabs) I happened to have on hand. Right away, I noticed a more defined midrange in the Telonics speaker. I replaced the stock Quilter speaker with a spare Telonics 4 OHM I had and was much happier with it in the amp. You might want to consider researching the Telonics speakers as well. As I understand it, they are custom made by Eminence for Telonics (with the JBL sound in mind).
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
