| Author |
Topic: Carter/Alumatone post_install question |
Howard Parker
From:
Maryland
|
Posted 9 Feb 2013 9:13 am |
|
Having just installed a new Alumatone on my Carter I noticed that it sits fairly deep in the cavity and the output is not quite as hot as the stock C6 p/u.
Did you Carter/Alumatone users find it helpful to shim the p/u? Leave well enough alone?
Thanks in advance.
h |
|
|
 |
Niels Andrews
From:
Salinas, California, USA
|
Posted 9 Feb 2013 11:02 am
|
|
I used foam and Velcro to shim mine on a MSA if you go to MSA U-12 For Sale you can see it otherwise will post a picture later.
_________________
Die with Memories. Not Dreams.
Good Stuff like Zum S-12, Wolfe Resoport
MSA SS-12, Telonics Combo. |
|
|
|
Howard Parker
From:
Maryland
|
Posted 9 Feb 2013 11:16 am Done!
|
|
I shimmed it about 3/16". It screams now. Pretty darn bright compared to the stock George L.
Have to tame this beast a bit! 
h
_________________
Howard Parker
03\' Carter D-10
70\'s Dekley D-10
52\' Fender Custom
Many guitars by Paul Beard
Listowner Resoguit-L |
|
|
|
Ken Metcalf
From:
San Antonio Texas USA
|
Posted 9 Feb 2013 3:49 pm
|
|
Alumitone install on Carter 12 string.
Mine was too close to the strings using the foam supplied.
In the end I drilled pilot holes and screwed it directly on the deck.
_________________
MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes |
|
|
|
Paddy Long
From:
Christchurch, New Zealand
|
Posted 10 Feb 2013 3:03 pm
|
|
Howard was your Alumitone mounted on a plate before install ?? I got a couple of these pickups from John Fabian and they came mounted on a plastic plate - which pretty much set the pickups close to the right spot.
_________________
14'Zumsteel Hybrid D10 9+9
08'Zumsteel Hybrid D10 9+9
94' Franklin Stereo D10 9+8
Telonics, Peterson, Steelers Choice, Benado, Lexicon, Red Dirt Cases. |
|
|
|
Howard Parker
From:
Maryland
|
Posted 10 Feb 2013 5:07 pm
|
|
Paddy,
No mounting plate. No big deal. I'm very happy with the result.
h |
|
|
|
