| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic '80 Emmons ST-10 PP Now Restored (Before & After...)
Goto page 1, 2  Next
Reply to topic
Author Topic:  '80 Emmons ST-10 PP Now Restored (Before & After...)
Lynn Stafford


From:
Ridgefield, WA USA
Post  Posted 26 Jan 2013 1:07 pm    
Reply with quote

Well, with my eyes wide open, I bought this butchered up mess of a guitar through Alex Cattaneo late last year. Without his personal assistance, I would not have been able to purchase it from the gentleman that had acquired it. Alec drove over to the seller, handled the transaction for me and even arranged to pack it up and ship it to me (with no case). Of course, I paid him for his time and trouble Very Happy

Here is a link to the topic that got it all started.

http://bb.steelguitarforum.com/viewtopic.php?t=234225&highlight=

Here are a few "before" photos, so you can see what I was up against.





I split the cabinet and removed the old mica from the rear deck. I then gave the two halves to my friend, Bob Littleton to rout out a lap joint and install the new maple filler block, as well as install the new piece of mica.

The cabinet is now masked up and ready for reflocking.





Both end plates had an extra hole drilled to mount jacks or switches. I had my friend and Forumite Tom Vollmer, an expert machinest, install plugs he had machined with an "interference fit" into the holes he had reamed to a specific diameter. He did this by freezing the plug and heating the end plate just before inserting the plug. He then took a cleanup cut of about .006 on the face of the endplates to get them ready for polishing.







Here is what the restored guitar looks like now.















It's for sale by the way, so please contact me if you might be interested. Please click on this link to take you to my web site.

http://steelguitarwest.com/guitars-currently-for-sale/

An original ST-10 PP guitar (that was not converted from a D-10) is pretty rare and hard to find.
_________________
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------


Last edited by Lynn Stafford on 29 Jan 2013 2:57 pm; edited 1 time in total
View user's profile Send private message Send e-mail Visit poster's website
Herb Steiner

 

From:
Spicewood TX 78669
Post  Posted 26 Jan 2013 1:25 pm    
Reply with quote

Lynn
I bow to your dedication and expertise, and to Mssrs. Littleton and Vollmer for theirs as well. A worthy thing you did, adding value to the world and restoring a great instrument, no doubt. Mega-kudos to you. I thought the guitar was almost beyond saving.

BTW, tell Bob Littleton "hey Bob" for me. We were neighbors at ISGC for a few years there.
_________________
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
View user's profile Send private message Send e-mail Visit poster's website
David Higginbotham

 

From:
Lake Charles, Louisiana, USA
Post  Posted 26 Jan 2013 1:27 pm    
Reply with quote

Amazing job to say the least Lynn!!!!
View user's profile Send private message Send e-mail
Douglas Bone

 

From:
Fort Worth,Tx. USA
Post  Posted 26 Jan 2013 1:31 pm    
Reply with quote

WOW, fantabulous, Lynn!!!
_________________
D10 Sho-Bud,D10 Mullen Pre RP, Session 500, N12
View user's profile Send private message Send e-mail
Richard Sinkler


From:
aka: Rusty Strings -- Missoula, Montana
Post  Posted 26 Jan 2013 1:47 pm    
Reply with quote

Great job Lynn. What was the cutout for? Tuner?
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting.
View user's profile Send private message Send e-mail
Alex Cattaneo


From:
Quebec, Canada
Post  Posted 26 Jan 2013 2:02 pm    
Reply with quote

Having been witness to do the damage myself, I can say I am astonished at the dedication and skill that Lynn displayed in this endeavour. This guitar was such a mess, many here thought it was beyond repair when I posted pics on the Forum.

At the time, I thought about trying to bring it back somewhat for myself, but in retrospect, I'm happy Lynn got his hands on it. Talk about rescuing a PP from the abyss!!!

Those endplates, I mean, seriously? Wow. The whole guitar looks stunning.

Richard, the cutout hosted a sort of mixing panel, with a plethora of knobs and switches and all. The guitar had three different outputs, and I never got a note out of it. It also had a mic stand attached permanently to the pad... hence you couldn't put it in a case.
View user's profile Send private message Send e-mail
Eric Philippsen


From:
Central Florida USA
Post  Posted 26 Jan 2013 2:05 pm    
Reply with quote

Wow, I am really impressed. I knew you did great work and I love seeing pics of every guitar you put your touch to, but this is really something.
View user's profile Send private message Send e-mail
Billy Knowles

 

From:
Kenansville, N. C. 28349 usa
Post  Posted 26 Jan 2013 2:17 pm     Lynn
Reply with quote

Wonderful job as usual!!!!!!!!!!!!!!!
View user's profile Send private message Send e-mail Visit poster's website
Jerry Jones


From:
Franklin, Tenn.
Post  Posted 26 Jan 2013 3:07 pm    
Reply with quote

Great job as usual, Lynn....a master's touch! Wink
View user's profile Send private message Send e-mail
Hook Moore


From:
South Charleston,West Virginia
Post  Posted 26 Jan 2013 3:30 pm    
Reply with quote

Outstanding Lynn !!
_________________
http://twitter.com/hook_moore
www.facebook.com/hook.moore
Blaine Moore
View user's profile Send private message Send e-mail
Skip Edwards

 

From:
LA,CA
Post  Posted 26 Jan 2013 5:45 pm    
Reply with quote

Very nice work, as always.
So...what became of the 705?
View user's profile Send private message Send e-mail
Ron Whitworth


From:
Yuma,Ariz.USA Yeah they say it's a DRY heat !!
Post  Posted 26 Jan 2013 10:21 pm    
Reply with quote

WOW Lynn!!
This is another one of your jobs that is just
" over the top " beautiful..
Very very well done my friend..
Congratulations
Ron
_________________
"Tone is in the hands. Unless your wife will let you buy a new amp. Then it's definitely in that amp."

We need to turn the TWANG up a little

It's not what you play through, it's what you play through it.

They say that tone is all in the fingers...I say it is all in your head Smile

Some of the best pieces of life are the little pieces all added up..Ron

the value of friendship. Old friends shine like diamonds, you can always call them and - most important - you can't buy them.
View user's profile Send private message Send e-mail
Lynn Stafford


From:
Ridgefield, WA USA
Post  Posted 27 Jan 2013 10:21 am     Thanks!
Reply with quote

Many thanks for the very kind words from everyone. I guess I wanted to take this project on because I felt it would be both challenging and rewarding for me (assuming I could actually restore the guitar after I had it). I figured the worst case would be that I would end up with a pile of PP parts Smile

Aside from the issues I mentioned above, I realized that the guitar was actually in much better condition than I had thought previously and was very encouraged, once I had it in hand.

Skip Edwards wrote:
Very nice work, as always.
So...what became of the 705?


I prefer the single coil sound, so I chose to sell the 705 and replace it with a stock Emmons pickup. Dave Beaty ended up buying it to use for lab research at Telonics. They are doing great things there, so more power to him and his company Very Happy
_________________
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website
Dave Beaty


From:
Mesa, Arizona, USA
Post  Posted 27 Jan 2013 10:37 am     Magic
Reply with quote

Lynn, what you do to these forlorn old instruments is nothing short of magic.
We all appreciate your efforts and those of your very talented friends.
Dave
View user's profile Send private message Send e-mail Visit poster's website
Ricky Davis


From:
Bertram, Texas USA
Post  Posted 27 Jan 2013 3:11 pm    
Reply with quote

Lynn I too stand in AWE of you my brother. Your dedication to detail and true restoration just far surpasses so many things. You are a true craftsman...and the passion you have for this work is shown in the biggest light to me...thanks for sharing and keep doing it man...it is very inspiring to see your work.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com
View user's profile Send private message Send e-mail Visit poster's website
Jeff Garden


From:
Center Sandwich, New Hampshire, USA
Post  Posted 27 Jan 2013 3:51 pm    
Reply with quote

Looks like another labor of love, Lynn...you're the best friend an old Emmons ever had! Beautiful work as always!
View user's profile Send private message Send e-mail
Kevin Mincke


From:
Farmington, MN (Twin Cities-South Metro) USA
Post  Posted 27 Jan 2013 3:58 pm    
Reply with quote

w0w Whoa!
Not much else to be said than what's been noted. As usual, another beauty from Lynn.
View user's profile Send private message Send e-mail Visit poster's website
Carl Williams


From:
Oklahoma
Post  Posted 27 Jan 2013 4:05 pm     Kudos
Reply with quote

Lynn,
You never disappoint when you post your "works of art" and BIG DITTO to what all the others have said about you and your skills! Add another feather to your hat my friend! IF (Never Say Never especially Steel Guitar folks! ha) I ever get into PP and need a restoration, I've got your number for sure. Way to go Lynn...super job!! Carl
View user's profile Send private message Send e-mail
Tommy Cass

 

From:
Baldwinville, Ma. U.S.A.
Post  Posted 28 Jan 2013 8:44 am    
Reply with quote

Lynn,
Congratulations on another great job.
Lynn has volumes of knowlege about P/p's and is very meticulous in his work.
View user's profile Send private message Send e-mail
Rich Peterson


From:
Moorhead, MN
Post  Posted 28 Jan 2013 9:33 am    
Reply with quote

I am amazed. I would never have thought that guitar could be made showroom perfect. Learn something (almost) every day.
View user's profile Send private message Send e-mail
Henry Matthews


From:
Texarkana, Ark USA
Post  Posted 28 Jan 2013 10:06 am    
Reply with quote

Great job Lynn.
It never ceases to amaze me the things that people can do to instruments. The fiddle I play today was on a front porch with ivy vines planted in it, LOL
_________________
Henry Matthews

D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes.
View user's profile Send private message Send e-mail
Bob Muller


From:
Oregon, USA
Post  Posted 28 Jan 2013 12:12 pm    
Reply with quote

Outstanding job as always Lynn, when you team up with Bob Littleton I don't think there's a guitar out there that you guys could not restore to like new condition. It's always great to see one of these classics brought back to life in such a grand way.
View user's profile Send private message Send e-mail
Adam Goodale

 

From:
Pflugerville, TX
Post  Posted 29 Jan 2013 1:03 am     Lynn's Expertise
Reply with quote

I own a very early Emmons P/P that i purchased from Lynn, that he also set up for me. I had very specific instructions and concerns regarding the correctness of the guitar being it is a vintage instrument, and Lynn absolutely nailed it. I will own the guitar until I die. Lynn is a true master craftsmen and such a wealth of knowledge when it comes to these instruments, and that shows in every guitar he works on. A steel that Lynn sets up sounds, plays, and looks exactly the way it is supposed to. On top of that he is truly a pleasure to do business with. Lynn, This Emmons looks wonderful, Congrats on bringing this beauty back to life. Hope your doing well!
_________________
Emmons P/P's into the loudest amp I can get ahold of. No effects other than reverb. EVER!. Come catch a show and be sure and say hi!
View user's profile Send private message Send e-mail
Tony Glassman


From:
The Great Northwest
Post  Posted 29 Jan 2013 8:12 am    
Reply with quote

Excellent job as usual, Lynn. I'll see you @ Dallas in March, if not before
View user's profile Send private message
Lynn Stafford


From:
Ridgefield, WA USA
Post  Posted 29 Jan 2013 3:32 pm     Replies
Reply with quote

Dave Beaty: Thanks so much, it's been such a pleasure getting to know you and using your Telonics equipment. I've enjoyed working on your personal Emmons PP guitars, too. Looking forward to the prospect of becoming a Telonics Dealer by this time next year.

Ricky Davis: Thanks for your kind words. I've seen photos of your work, so back at ya my friend!

Jeff Garden: Thanks very much to you as well! Jeff owns a couple of my Emmons S-10 PP guitars, a '72 that I restored and the very first '04 S-10 reissue!

Kevin Mincke: Thanks so much to you for posting your nice comments.

Carl Williams: Thanks to you once again!

Tom Casella: Thank you my friend! That's quite a complement, coming from someone like you. I've seen your work first hand and it's really top notch!

Rich Peterson: Thanks for your thoughtful comments.

Henry Matthews: Thank you very much. It's been a pleasure getting to know you.

Bob Muller: Thank you my friend! It's truly great having people like you and Bob as my friends. I'm so glad you are enjoying the teal lacquer Emmons PP you bought from me late last year.

Adam Goodale: Wow, it was so very kind of you to say all those things. I'm glad you're enjoying that bolt-on (that you talked me into selling to you...) LOL, I wanted to hang on to that one but I know it has a very good home with you.

Tony Glassman: Thanks buddy! Yes, Kathy and I are very excited about going to Dallas once again, so I'ts great you and Karen will be there too, along with several others from the Northwest!!
_________________
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron