Author |
Topic: Rains Pull Rod Retainers |
Bob Poole
From: Myrtle Beach SC, USA
|
Posted 7 Feb 2013 1:11 am
|
|
Thought i'd pass this along if any of you like to keep spares.I just got my first Rains a couple of weeks ago,a 2006 SD10
& i just like to keep spare bits around for an emergency,springs,screws,nylon hex nuts,etc.The 3/32 push-on rod-thru-bellcrank retainers were hard to find locally but a company called MSCDirect or MSC Industrial has them for around $11.00 per box of 100.their phone number is 800-645-7270 & the item/part number is 67155887.Again,these are for the 3/32 diameter rods so make sure of what you have.Also like to mention that Gary & Curtis @ Rains are great guys to deal with & have really gotten me off to a good start with owning this guitar....i had a lot of questions that went along with going to a new make of guitar & they have really been a tremendous help to me. |
|
|
|
Billy Carr
From: Seminary, Mississippi, USA (deceased)
|
Posted 7 Feb 2013 2:09 am psg
|
|
I always put 2 of the clips on each pullrod. Never a problem. Did RAINS ever get a website back up? |
|
|
|
Bob Poole
From: Myrtle Beach SC, USA
|
Posted 7 Feb 2013 6:39 am Rains website
|
|
Not yet it does'nt look like but they sure are prompt to respond to any inquiries ! |
|
|
|