| Author |
Topic: Pedals 'D' thru 'H' |
Martin Zeigler
From:
Camden, Maine, USA
|
Posted 3 Jan 2013 7:14 am |
|
Hello. Available material is specific about the use and tuning of the the first three (A B and C pedals) but I can't find anything on the other 5 on an 8 pedal PSG. I'm getting a D10 ShoBud Pro II Custom with 8 pedals and need to know so I can get the most out of it. I think the ABC are for the E9 neck. Are the rest for the C6? Any pointing in the right direction would be greatly appreciated.
Thank you for reading this.
Zig |
|
|
 |
Lane Gray
From:
Topeka, KS
|
Posted 3 Jan 2013 7:34 am
|
|
The C6 pedals are generally known by number, not name.
P4 raises strings 4 and 8 from A to B
This pedal is unfortunately nearly obsolete, but has some cool uses. Some use it as an inverse P6, lowering 2 and raising 6
P5 raises 10 to D, 9 to F# and lowers 5 to F# (if you use a 1st string G, it usually raises that to G#). Because it often gets used together with P7, many people put it on a knee, but still call it P5.
P6 raises string 2 to F and lowers 6 to Eb
P7 raises 3 to D and 4 to B
P8 lowers 10 to A and 9 to E while raising 7 to C#. If you use a 1st string D, many raise it to Eb
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Bill Moore
From:
Manchester, Michigan
|
|
|
|
CrowBear Schmitt
From:
Ariege, - PairO'knees, - France
|
|
|
|
Ray Minich
From:
Bradford, Pa. Frozen Tundra
|
Posted 4 Jan 2013 8:03 am
|
|
I always wondered what those pedals were for, I thought they were just spare parts... 
Actually, putting them to the fullest good use may have to wait for another lifetime for me.......
_________________
Lawyers are done: Emmons SD-10, 3 Dekleys including a D10, NV400, and lots of effects units to cover my clams... |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 4 Jan 2013 5:38 pm
|
|
| Quote: |
| I always wondered what those pedals were for, I thought they were just spare parts... |
They are to a lot of owners.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Jack Aldrich
From:
Washington, USA
|
Posted 4 Jan 2013 5:45 pm
|
|
| Lane Gray wrote: |
The C6 pedals are generally known by number, not name.
P4 raises strings 4 and 8 from A to B
This pedal is unfortunately nearly obsolete, but has some cool uses. Some use it as an inverse P6, lowering 2 and raising 6
P5 raises 10 to D, 9 to F# and lowers 5 to F# (if you use a 1st string G, it usually raises that to G#). Because it often gets used together with P7, many people put it on a knee, but still call it P5.
P6 raises string 2 to F and lowers 6 to Eb
P7 raises 3 to D and 4 to B
P8 lowers 10 to A and 9 to E while raising 7 to C#. If you use a 1st string D, many raise it to Eb |
Hey Lane! When I bought my Carter, I had Bud change P4 to raise both C's to C#'s. Then I get the 1st inversion of the C chord at the 3rd fret with pedals 4 and 5, and the 2nd inversion at the 7th fret with pedal 6. Since I have a D on my first string, the chord with the 4 and 5 pedals has an E on the 2nd string - good for Western Swing. - Jack
_________________
Jack Aldrich
Carter & ShoBud D10's
D8 & T8 Stringmaster
Rickenbacher B6
3 Resonator guitars
Asher Alan Akaka Special SN 6
Canopus D8 |
|
|
|
Neil Harms
From:
Ionia, Missouri, USA
|
Posted 6 Jan 2013 1:46 pm
|
|
| When I got my Carter it had the two low strings of P5 on a center knee lever. The two high strings on P5 are still on P5. G note on the top string. I'm new to C6 also so wondering why these pulls are split. Thoughts? The rest of the pedals are all "standard". |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 6 Jan 2013 5:30 pm
|
|
No idea. I have P5 on LKR
If I had to put any part of P5 on a knee, leaving some on a pedal, I'd put 9 and 10 on the floor, and upper strings on the knee. There's often a need for combining the fifth string P5 with P7. You're still double-footing
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Neil Harms
From:
Ionia, Missouri, USA
|
Posted 6 Jan 2013 5:51 pm
|
|
| Interesting. So if one chooses to put P5 in a lever, what goes on the P5 on the floor to replace it? |
|
|
|
Lane Gray
From:
Topeka, KS
|
Posted 6 Jan 2013 6:40 pm
|
|
What some do is put an inverse P6.
What _I_ did was move everything else over, with P8 raising the upper two C strings to C#, so I can hit P5 and P8 together to have the old high G C6 three frets up.
It was Bruce Zumsteg that suggested that.
As a student and friend of Mike Auldridge, I originally had P8 on LKR (Tommy showed that to Mike, and that's what he had: Mike also suggested an asymmetric RKL that lowers 4 to G# and 8 to G), but Bruce suggested I swap
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
|
Neil Harms
From:
Ionia, Missouri, USA
|
Posted 6 Jan 2013 7:00 pm
|
|
| Thanks Lane. Guess I have some thinking to do. May move P4 to E9 and scoot the existing P4 to the right. Then I can put the other two P5 pulls on the knee lever. I'd still have a full C6 to work with that way and I'd get a 4x5 setup on E9. Actually it would be a 5x5 as I have P9 on the E9 neck. |
|
|
|
