Setting up two amps with Dual Deltafex.. question

Don Christy · Posted 24 Dec 2012 12:43 pm

After going through the Peavey Dual Deltafex manual, I'm still lost on how to plug my cables in the Delatfex and then to one amp or two amps.

I have a cable coming from my guitar going to my Match Box...then to my volume pedal, now I have two audio inlets on my Deltafex..a Right inlet and Left/mono inlet.

Now on the outputs I have a Right output and a Left/mono output.

How do I hook the cables up from the volume pedal to the Deltafex audio inlets then from Deltafex audio outputs to run both of my amps or one amp? One amp is a Nashville 112 and the other amp is a Session 400.

What is the best way to get the stereo sound?

Thank you!

Don

Howard Montgomery · From: Topeka, KS US

Into the mono/left input of the Deltafex, the if running two amps, each output of the DF to each amp if using two. If only using one amp, the use the left/mono output.

Don Christy · Posted 24 Dec 2012 1:10 pm

Thank you Howard! I'll give it a try. I don't think I can screw up this time.

I know I could use the effects loop on my 112, but then I would have to many cables..which I don't want. I always try and keep things simple.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: