Peavy 112 Settings

Carol Teston · From: South Carolina, USA

HI EVERYONE

CAN ANYONE SUGGEST SOME SETTINGS FOR THE 112??

PLAYING A SHO-BUD WITH RV-D REVERB AND DD-3 DELAY I KNOW IT DEPENDS ON SEVERAL THINGS BUT A GOOD STTARTING POINT WOULD HELP

THANK YOU CAROL

Andy Sandoval · From: Bakersfield, California, USA

This link might help -------> Nashville 112 Recommended Settings

Gary Reed · Posted 23 Dec 2012 5:14 am

I saw Norm with The Hag. Norm had my GFI and the Nashville 112.
I really wanted to see the settings on the 112, but could not.
If anyone has got a look at them, I'd love to know.

Susan Alcorn · From: Baltimore, MD, USA

Carol, I find that my steel guitars sound best when both mid controls are set two 12 o'clock, then dial in the bass and treble for the room. Hope this helps a little bit.
_________________
www.susanalcorn.net

"So this is how you swim inward. So this is how you flow outwards. So this is how you pray."
- Mary Oliver

Danny Letz · From: Old Glory,Texas, USA 79540

Mine has the Ken Fox chips, but I still set it about the same. Low +5 1/2. Mid -8 1/2. Shift a tiny bit before 800. (pointing at the top of the Cool

High +3 1/2. Presence +4 1/2. Reverb 3 1/4. Master Gain 5. At least that's where it is right now.

Larry Bell · From: Englewood, Florida

For me, every room is different. I start with everything straight up and go from there.
_________________
Larry Bell - email: larry@larrybell.org - gigs - Home Page
My CD's: 'I've Got Friends in COLD Places' - 'Pedal Steel Guitar'
2021 Rittenberry S/D-12 8x7, 1976 Emmons S/D-12 7x6, 1969 Emmons S/D-12 6x6, 1971 Dobro, Quilter ToneBlock 202 TT-12

Lane Gray · From: Topeka, KS

Try this process in the second post.
http://bb.steelguitarforum.com/viewtopic.php?t=223731

It'll help find your tone
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: