Putting a jewel fixture in a session 400

Bill Howard · From: Indiana, USA

OK i know I'm not the only peavey guy that wanted to put a Fender type Jewel light in my session 400 any help appreciated... I know fender is 6.3 V ac Peavey is 120 AC(Thanks Ken Fox) is there a bulb in the peavey behind the red light in it now?how is it set up??? THanks Guys...

Ken Fox · From: Nashville GA USA

No bulb, it is a neon lamp.

You would have to drill a larger hole to use the lamp base rated at that voltage:

From Antique Electronics:

SKU:P-L110

Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 1/4 miniature bayonet lamps. 11/16" chassis hole. Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs) Rating: 125V, 75W

Threading: 9/16 - 24
Available Jewels

Amber P-L117
Blue P-L120
Clear P-L122
Green P-L116
Purple P-L121
Red P-L115
Violet P-L121V
White P-L123

lamp would be:

Dial Lamp - NE51, T-3-1/4, 90/110V, .0003A, Bayonet Base

SKU:P-NE51

Long life general replacement lamps for dials, indicators, etc.

Bill Howard · From: Indiana, USA

Ken your great thank you I appreciate it...

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: