| Author |
Topic: Sierra Pedal Steel tuners |
David Martens
From:
Montana, USA
|
Posted 28 Sep 2012 4:15 pm |
|
Hi everyone,
I have recently acquired a Sierra twin neck/9pedal steel guitar from a fellow in Butte,MT. The gentlemen only wanted the tuners off of it. He has since misplaced them and now I'm in need of 20 tuners to make it operable. I purchased 2 sets Grover pedal steel guitar tuners, but they were to big to fit. Are there different sizes of tuners, or do I need to modify the headstock (same terminology as a guitar?)to make the Grover's fit?
Thanks
Dave Martens |
|
|
 |
Jon Light
From:
Saugerties, NY
|
|
|
|
Roy McKinney
From:
Ontario, OR
|
Posted 29 Sep 2012 6:08 am
|
|
| Dave, what is the serial number on that D10/9p? |
|
|
|
David Martens
From:
Montana, USA
|
Posted 2 Oct 2012 1:52 pm
|
|
| The serial numbers on the Sierra are 0050. |
|
|
|
Roy McKinney
From:
Ontario, OR
|
Posted 2 Oct 2012 1:56 pm
|
|
I was courious as I used to have S/N 00015. Sold it to a guy up in WA at a cheap price and he was suppose to come back to me if he didn't like it. Instead he sold it to someone else.
Thanks for the response. |
|
|
|
Ross Shafer
From:
Petaluma, California
|
Posted 2 Oct 2012 2:56 pm
|
|
I asked my pal Tom Baker about your tuner question. Here's what he had to say:
"The Pre-Session guitars had the old full-size grovers. The Session guitars used the mini-grovers like on the lap-steels" |
|
|
|
