| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Gibson EH-150 DN Special Doubleneck Lap Steel Elec Guitar
Reply to topic
Author Topic:  Gibson EH-150 DN Special Doubleneck Lap Steel Elec Guitar
Steve Uhrik

 

From:
New York, USA
Post  Posted 15 Sep 2012 1:05 pm    
Reply with quote



Gibson EH-150 DN Special Doubleneck Model Lap Steel Electric Guitar (1937), made in Kalamazoo, Michigan, serial # 658-3, sunburst lacquer finish, maple body and necks, rosewood fingerboards, handmade hard shell case.

$2,950.00 by Retrofret Vintage Guitars. sales@retrofret.com

This is a very early rare and interesting Gibson doubleneck steel, the result of a custom order in 1937. Twin neck instruments like this allowed players to rapidly shift between tunings, even in mid-song, before the perfection of pitch changing devices. These expensive oddities were primarily the province of advanced professional players, and many were one-off creations. This one combines a 7-string and 8-string EH-150 into a single relatively portable package, looking rather like maple-bodied Siamese twins. While this configuration was the most popular for Gibson and was eventually cataloged as a regular model, this example is doubly unusual as each guitar has its own tone and volume controls; other similar twins are generally equipped only with a single set of controls. It also moints Gibson's optional bridge covers on both sides. The instrument appears identical to one pictured with Guy Principato in Gibson catalog AA (1940) and may well have belonged originally to this performer as it was discovered in his old Boston-area stomping grounds. For the adventurous vintage-style steel player or Gibson collector this is a wonderful find, complete with the original performance stand.

Overall length is 33 1/2 in. (85.1 cm.), 14 7/8 in. (37.8 cm.) wide at lower bout, and 1 3/4 in. (4.4 cm.) in depth, measured at side of rim. Scale length is 22 5/16 in. (567 mm.). Width of nut is 2 1/2 in. (64 mm.). Well played but all original and unaltered; there is a decent amount of finish wear to the back and sides, mostly from rubbing against the stand and case over the years. There is some finger wear from picks on the face near the fingerboard of the 7-string, but not heavy. Checking, small dings and chips all around but overall still very nice looking. There is one crack back to the rim off one of the 7-string bridge screws. As is common with many of these early 150's, the screwed-on back has shrunk a bit off the hollow rim, leaving a small gap at the back edge. Very fine sound, one of the coolest early Gibson steels we have had. Overall Excellent Condition. [/img]
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron