| Author |
Topic: "Song for Sarah" backing track |
Carl Kilmer
From:
East Central, Illinois
|
Posted 1 Oct 2012 1:35 pm |
|
Hi Guys and Gals,
I looking for a couple of good backup tracks for these.
"Song for Sarah" and "Bars of Steel" If anyone has one
or both of these, I would really appreciate a copy.
Many thanks for either one or if possibe both of them.
Carl "Lucky" Kilmer
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal
Last edited by Carl Kilmer on 6 Oct 2012 7:24 am; edited 1 time in total |
|
|
 |
Keith Davidson
From:
Nova Scotia, Canada
|
Posted 4 Oct 2012 8:15 am
|
|
Carl, let me have a look around on the net and see what I can find. I'm pretty sure I can track down a midi for you and then I can convert it to an mp3 for you.
Just got home from work and I've got some stuff to do first but I'll get back to you this afternoon.
Keith |
|
|
|
Keith Davidson
From:
Nova Scotia, Canada
|
Posted 4 Oct 2012 9:21 am
|
|
I found "song for sarah" but I'm not sure if it's the correct song as I don't know it.
I converted it to mp3 from midi so if anyone wants it shoot me an email and I'll send it off to you.
Didn't have time to check so I don't know what key it's in.
If I get a chance later I'll see if I can't find Bars of Steel as well.
Keith |
|
|
|
Keith Davidson
From:
Nova Scotia, Canada
|
Posted 4 Oct 2012 9:47 am
|
|
Just found Bars of Steel, email me if you want it.
Keith |
|
|
|
Carl Kilmer
From:
East Central, Illinois
|
Posted 4 Oct 2012 1:16 pm
|
|
Hey Keith, Many thanks my friend. I just got home from
my dentist 100 miles away, and see you sent me an email.
Wow! I'm glad you have both of them, and that's wonderful.
I sent you an email. Thanks again, I greatly appreciate it. 
Carl
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|
|
|
Keith Davidson
From:
Nova Scotia, Canada
|
Posted 4 Oct 2012 1:20 pm
|
|
Ok, apparently the "song for sarah" is the wrong one. The bars of steel is good to go but since I hadn't heard song for sarah before I downloaded a song by the same name.
Someone sent me a link to the paul franklin version so at least I know what I'm looking for now.
So anyone looking for song for sarah - it's on hold till I find the right version. IF I can find it that is.
There are a few guys that have this song posted on youtube and they are playing pedal steel over a backing track - I wonder would they share it?
In the meantime I'll keep looking. |
|
|
|
Keith Davidson
From:
Nova Scotia, Canada
|
Posted 4 Oct 2012 1:29 pm
|
|
Anyone know Terry Sutton well enough to ask him for a copy of the backing track he is using for song for sarah?
He does a real nice job of it here:
https://www.youtube.com/watch?v=3GR4Fs7Ot2A |
|
|
|
Carl Kilmer
From:
East Central, Illinois
|
Posted 6 Oct 2012 7:35 am
|
|
Thanks Keith, I've done a lot of searching on Google
and there are lots of "Song for Sarah" but their all
the wrong ones. Hopefully someone has the right one.
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|
|
|
Craig A Davidson
From:
Wisconsin Rapids, Wisconsin USA
|
Posted 8 Oct 2012 6:46 pm
|
|
| Song for Sarah is on the disk that comes with Anthology of a Steel Guitar by Scotty. Bars of steel is also on there. |
|
|
|
Carl Kilmer
From:
East Central, Illinois
|
Posted 8 Oct 2012 7:36 pm
|
|
Hi Craig, I have the "Anthology of a Steel Guitar"
with CD. The song is on there with Paul playing it
but it the CD does not have a backing track on it.
I'd like to get the track, but I guess no one has it.
Carl
_________________
aka "Lucky Kay"--Custom built Rittenberry SD10 3X5, Walker S/S, NV-112, and Hilton Pedal |
|
|
|
Craig A Davidson
From:
Wisconsin Rapids, Wisconsin USA
|
Posted 9 Oct 2012 12:30 am
|
|
| Carl you are so right. What was I thinking? I gues it has been too long since I went through the book. |
|
|
|
