| Author |
Topic: PROMAT parts |
Zoran Kosir
From:
Slovenia
|
Posted 18 Sep 2012 2:33 pm |
|
Promat PP(push-pull) parts on:
www.promat-steel-guitars.com
You can order PP parts also for the other PSG PP guitars to replace old or brocken parts.
[img]
[img]
www.promat-steel-guitars.com
_________________
PROMAT PRO S10, PROMAT SE10 Economy, Goodrich, Fender Steel King. |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 19 Sep 2012 7:45 am
|
|
| Are the holes for the cross shafts metric? |
|
|
|
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 20 Sep 2012 2:56 pm Metric Shafts/Holes
|
|
Hi Erv,
The Promat is completely Metric through and through but the 8mm shafts convert to .315" which is very close to 5/16" (.3125). The Emmons PP swivels will fit the Promat bell cranks and the Emmons bell cranks fit on the Promat shafts (as long as the nickel plating isn't too thick on one or both, to cause interference). I found that the plating on most of the Promat parts is fairly thin. There should not be any problem using a Promat bell crank on a 5/16" Emmons shaft.
It would be interesting to see how much Mr. Papic charges for his bell cranks. Emmons PP bell cranks are getting increasingly harder and harder to acquire.
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 21 Sep 2012 6:51 am
|
|
Thanks, Lynn  |
|
|
|
Zoran Kosir
From:
Slovenia
|
Posted 21 Sep 2012 12:53 pm
|
|
[img]
Here you can see another Promat parts. Thanks for info Lynn. Yes, dimension 8,00mm (to tolerate 7.94mm) ... For more info or another dimensions you can contact directly to:
www.promat-steel-guitars.com
_________________
PROMAT PRO S10, PROMAT SE10 Economy, Goodrich, Fender Steel King. |
|
|
|
Zoran Kosir
From:
Slovenia
|
|
|
|
