Author |
Topic: Anyone Know This Headstock |
Joseph Barcus
From: Volga West Virginia
|
|
|
|
Bill Hatcher
From: Atlanta Ga. USA
|
Posted 24 Sep 2012 1:43 pm
|
|
thumbnail pic is way too small!! |
|
|
|
Ben Elder
From: La Crescenta, California, USA
|
Posted 24 Sep 2012 2:33 pm
|
|
Big Asian factory from somewhere between here and the Nixon Administration. Generic brand basses--ask for 'em by name. Full/body shot (don't skimp on the pixels) would tell a lot more. _________________ "Gopher, Everett?" |
|
|
|
Joseph Barcus
From: Volga West Virginia
|
|
|
|
David Nugent
From: Gum Spring, Va.
|
Posted 24 Sep 2012 4:25 pm
|
|
Joseph...Should be a label of some sort located on the inside of the bass (normally attached to the back of the body)listing the name of the builder and the serial number. May be visible through one of the F-holes. |
|
|
|
Joseph Barcus
From: Volga West Virginia
|
|
|
|
Rick Abbott
From: Indiana, USA
|
Posted 24 Sep 2012 6:21 pm
|
|
I'd say 68-74, made in the same factory as the Japanese Epiphones of the era. I had a very similar bass at one time. It was an Electra? or something like that. All the hardware was identical, and the headstock was similar. The factory made the headstocks to the requirements of the buyer...Epi, Electra, etc. _________________ RICK ABBOTT
Sho~Bud D-10 Professional #7962
Remington T-8, Sehy #112
1975 Peavey Pacer 1963 Gibson Falcon |
|
|
|