| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Installation of pedal rods on my Pro 2-Custom Sho-Bud
Reply to topic
Author Topic:  Installation of pedal rods on my Pro 2-Custom Sho-Bud
David Rankin


From:
British Columbia, Canada
Post  Posted 15 Jun 2012 2:13 pm    
Reply with quote

Embarassed

Hello steelers - total newbie question:

Well I have made a big leap from my Carter Starter to a Sho-Bud !! Custom and I am confused about how I install the pedal rods. On the Starter, the rods came in from the side and there was only one hole to choose from. On the Sho-Bud, there are 3 holes, and as I see it, there are 2 possible ways that the rods can be attached to the pedal rod lever:
1) with the "l-shaped"hook end, pointing inwards
2) and with the hook end pointing outwards towards the wooden front of the guitar.

I'm pretty sure it is 1) but the pedals are very hard to push down when set up in this way.

If anybody has any pictures, or videos that could help me set this up - It would be much appreciated.

And any info on which of the pedal level holes to choose would be great too.

Thanks,
- Daver

View user's profile Send private message Send e-mail
Ray Anderson

 

From:
Jenkins, Kentucky USA
Post  Posted 15 Jun 2012 2:21 pm    
Reply with quote

That is correct installation (I have a Pro 111)> I positioned mine to determine the ease and difficulty of squeezing the pedals. Close to the axle short and harder, farthest from the axle longer pull and easier. Tweak it to your satisfaction.YMMV Cool Hope this helps
View user's profile Send private message Send e-mail
David Rankin


From:
British Columbia, Canada
Post  Posted 15 Jun 2012 2:37 pm    
Reply with quote

So the proper rod installation is the one on the left in the picture, not the right? Great. And I'll try to move it over to the 3 hole - tight squeeze!. Thanks.
View user's profile Send private message Send e-mail
Ray Anderson

 

From:
Jenkins, Kentucky USA
Post  Posted 15 Jun 2012 2:59 pm    
Reply with quote

I like a long pull on my A&B pedals and short on my C. Mine are like this A last hole to the left, B&C center hole. But kind of play around until you find what is comfortable for you. Wink Hope this helps. Ray
View user's profile Send private message Send e-mail
John Billings


From:
Ohio, USA
Post  Posted 16 Jun 2012 12:11 pm    
Reply with quote

It's not a new guitar, so by careful examination of the levers, you may be able to see some wear, which might tell you where previous owners had the rods hooked up.
JB
View user's profile Send private message Send e-mail
Lane Gray


From:
Topeka, KS
Post  Posted 16 Jun 2012 1:35 pm    
Reply with quote

Yes, but there's no answer to the pointing in vs. pointing out.
I'd be inclined to point them in, but if that increases difficulty in playing, I'd point them towards the apron.
_________________
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
View user's profile Send private message Send e-mail Yahoo Messenger

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron