| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Peavey Nashville 112. What's Your Settings For Lap Steel?
Reply to topic
Author Topic:  Peavey Nashville 112. What's Your Settings For Lap Steel?
Doug Burling

 

From:
Ohio, USA
Post  Posted 20 Apr 2012 6:52 pm    
Reply with quote

I have a used Nashville 112 on loan from a local music store. I've been playing around with the 112's settings, trying to dial in the tone with my Sierra S8. I'm getting close and thought I'd ask other Nashville 112 owners what your settings are for lap steel. Any tips you'd want to share would be great.

Thanks, Doug
View user's profile Send private message Send e-mail
Mike Brown

 

From:
Meridian, Mississippi USA
Post  Posted 23 Apr 2012 7:29 am     Clean lap on Nashville 112
Reply with quote

Try this;
http://www.peavey.com/assets/literature/manuals/nashville112.pdf
View user's profile Send private message
Doug Burling

 

From:
Ohio, USA
Post  Posted 23 Apr 2012 7:32 am     Re: Clean lap on Nashville 112
Reply with quote

Mike Brown wrote:
Try this;
http://www.peavey.com/assets/literature/manuals/nashville112.pdf


Mike, thanks for the link for the manual. Big help!

I,m still curious what others have their NV 112 settings at.
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 23 Apr 2012 7:38 am    
Reply with quote

Doug, I use the same basic settings shown in the manual, but a little more reverb.
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel
View user's profile Send private message Send e-mail Visit poster's website
Doug Burling

 

From:
Ohio, USA
Post  Posted 23 Apr 2012 2:56 pm    
Reply with quote

I went ahead and bought the Nashville 112. It looks like it's brand spank'n new. The $300 price was to good to turn down. Besides, it sounds fantastic with the Sierra S8. My settings right now are: pre gain 4, low 0, mid -7, shift 700, high -3, presence 4, reverb 2 and
master gain 3. Sounds good, but I'm still experimenting.
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 23 Apr 2012 4:41 pm    
Reply with quote

Yes, the 112 is a good amp for small rooms or for recording. I just used mine yesterday on a recording session and had very good results. In general, with all the Peavey steel amps, cut the mids and boost the lows for steel guitar. I've owned most of the Peavey amps in the last 30 years and all of manuals, as I remember, recommended setting the shift at 800 and cutting the mid way back for steel guitar. And a slight boost in the highs and presence. Also… it’s very important to keep the master gain above 5 or your tone will suffer. I run the master at 7 and pre gain at 4, and I use a volume pedal. If you set the master too low and the pre gain to high you’ll get a dirty tone… which some players may like. For the warmest, cleanest (IMO) sound keep the master over 5 and the pre gain under 5.
_________________
My Site / My YouTube Channel
25 Songs C6 Lap Steel / 25 MORE Songs C6 Lap Steel / 16 Songs, C6, A6, B11 / 60 Popular Melodies E9 Pedal Steel
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron