| Author |
Topic: Latest effort. |
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 23 Mar 2012 12:22 pm |
|
I forgot to put an underneath shot. Martin
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
 |
Rick Contino
From:
Brattleboro, Vermont
|
Posted 23 Mar 2012 1:05 pm
|
|
Wow! Looks like a smooth operator. Where do you get your parts for the undercarriage?
_________________
Shobud "The Professional" D-10, Stage One S-10, National "New Yorker," NV400 |
|
|
|
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 23 Mar 2012 4:09 pm
|
|
Rick, I machine all my own parts. The only thing I dont build is the tuning keys (I use Grovers) the legs, and the pickup. Martin.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
|
Rick Contino
From:
Brattleboro, Vermont
|
Posted 23 Mar 2012 4:44 pm
|
|
Holy moley! I'm impressed!
_________________
Shobud "The Professional" D-10, Stage One S-10, National "New Yorker," NV400 |
|
|
|
Joseph Meditz
From:
Sierra Vista, AZ
|
Posted 23 Mar 2012 8:56 pm
|
|
Surf green! Looks like this guitar has a water theme to it. Very attractive, creative and uncommon.
I like the way the pull rods connect to the bell cranks. Changing the copedant looks very easily done. Are are the cross shafts steel or aluminum?
Also in the other pix, the changer looks beefier than typical. Is that true? And is this changer sealed? In other words when someone buys your guitars do you recommend that they never oil the changer?
Lastly, do you sell parts such as your changer or bell cranks?
Thanks for sharing the pictures with everyone.
Joe |
|
|
|
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 24 Mar 2012 3:30 am Latest Effort
|
|
Joseph, all my parts are aluminum (6061) with the exception of the top part of the fingers which I machine from 7075 aluminum (harder and stronger). the bottom raise and lower parts of the fingers are stainless steel (304, and .060 thick). The only steel I use in my guitars is stainless and that only includes the fingers (as mentioned) and the screws. The changer does need to be oiled on ocasion like any other. I use a 1/2 inch precision ground hard anodized 7075 aluminum axle shaft in the changer. I am not selling parts right now, I am building a workshop behind my house, so maybe later. This is not a business to me, it is a hobby that I love to do. Thanks for the complements, Martin.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
|
Ransom Beers
|
Posted 24 Mar 2012 4:06 am
|
|
| Martin are you using CNC machines or manual?I'm a retired machinist & out of curiosity is my point in asking.37 1/2 yrs. building everything from lawn mowers to spaceships. |
|
|
|
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 24 Mar 2012 4:35 am Latest Effort
|
|
Ransom--- I have a 9X49 Jet , Bridgeport type manual mill. I wish I had a CNC but I doubt I could learn to program it. Sure would save a lot of building time. Joseph--- The "surf green" flocking is actually called "pea green" When I was doing the inlay work on the front apron it seemed to go best with the abalone and turquoise stone,and obveosly the deck which I justed kind of "misted" over with green dye with my spray gun. I like light colors. Thanks, Martin.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
|
Ransom Beers
|
Posted 24 Mar 2012 4:47 am
|
|
Did you ever think of a retro-fit on that manual/w a cad/cam program hooked directly to the machine programming would be simple.I used to run CNC's,big monsters to the small Tree & Handyman,programming is as easy as making a sour note in "G#" 
Which I do frequently!!! |
|
|
|
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 24 Mar 2012 5:19 am Latest Effort
|
|
Ransom, I have thought of that and when I get my shop built (2 weeks) I may look into that. If programing is as easy as making sour notes I should undoubtedly excell in the programming part. Martin.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
|
Ransom Beers
|
Posted 24 Mar 2012 5:21 am
|
|
I'd be the Paul Franklin/Buddy Emmons of programming!!!! |
|
|
|
Joseph Meditz
From:
Sierra Vista, AZ
|
Posted 24 Mar 2012 8:36 am
|
|
| Quote: |
| The changer does need to be oiled on ocasion like any other. I use a 1/2 inch precision ground hard anodized 7075 aluminum axle shaft in the changer. |
The steel axle in the changer on my Excel is not precision ground. When I had everything apart I thought a precision ground axle would be a nice upgrade.
After I made a new cabinet and the guitar was in pieces I cleaned everything with naphtha and removed all oil and grease from everywhere like on the delrin bushings which don't need oil. Where I wanted some lubrication, such as on stops I used dry Dupont Teflon available from Lowes.
Having the changer apart was an enlightening experience. It consists of milled aluminum rollers with a milled trunnion that slides in a slot on a stainless steel finger. In each slot/trunnion pair Mitsuo put a light jelly-like clear grease. To my astonishment, the grease was absolutely clean! Only by the end roller that was not sandwiched in between fingers was the grease totally black.
Had there been a thin plate covering the last roller, it too would've been clean.
So, after reading so many threads on lubricating the changer: 3 in One oil, Triflow, ATF, motor oil, gun oil, sewing machine oil, etc. I used none of them! Instead, I used Finish Line teflon grease from a bicycle shop. (OK. I did put a drop of Triflow on the finger rivet, but that's all.) That trunnion really needs something with a little body that will stay put. And in fairness, the old master Mitsuo Fujii is quoted somewhere in the SGF as saying "No oil."
In summary I think a modern, well designed, guitar should never require the use of an oil can and that the changer should be sealed and not require further lubrication.
Joe |
|
|
|
Henry Matthews
From:
Texarkana, Ark USA
|
Posted 24 Mar 2012 8:40 am
|
|
Wow, I'm impressed too, what a good looking rig and some really great machine work.---Henry
_________________
Henry Matthews
D-10 Magnum, 8 &5, dark rose color
D-10 1974 Emmons cut tail, fat back,rosewood, 8&5
Nashville 112 amp, Fishman Loudbox Performer amp, Hilton pedal, Goodrich pedal,BJS bar, Kyser picks, Live steel Strings. No effects, doodads or stomp boxes. |
|
|
|
Bent Romnes
From:
London,Ontario, Canada
|
|
|
|
Martin Weenick
From:
Lecanto, FL, USA
|
Posted 27 Mar 2012 9:50 am
|
|
I forgot to put a picture of the cover I had made by a very lovely lady by the name of Leann Sharp. She does flawless work and uses top of the line materials. ( she is on the forum ) Also I changed the armrest to black instead of the tan colored one. I think I like the black better on this guitar. Sorry for the lousey pictures, anything more complicated than a Brownie and I'm blown away. Martin.
_________________
Several custom steels. NV-112 Boss DD-7 |
|
|
|
George McCann
From:
Maui, USA
|
Posted 27 Mar 2012 10:07 pm
|
|
It is easy to tell that you love building these gems.
The precision and clean lines speak of your pride and joy of building Pedal steels.
_________________
As I've aged I've wondered why my mental powers haven't expanded like my waist line.
Rain SD-10, Fessy U-12,Harlow Dobro, Eastman 912 mandolin, Zhu Fiddle, guitars, gizmos and buu-kuu Amps |
|
|
|
Storm Rosson
From:
Silver City, NM. USA
|
Posted 28 Mar 2012 6:41 am
|
|
 Martin the black pad nailed it down, it looks positively perfect now, awesome buddy.....Stormy   |
|
|
|
Ray Minich
From:
Bradford, Pa. Frozen Tundra
|
Posted 29 Mar 2012 6:03 am
|
|
The view makes this engineer's heart go thumpa thumpa.
CNC programming isn't that difficult. Start out learning how to find the part(i.e. find zero) and go from there.
Then cut some air for a while to observe toolpath commands.
WATCH FOR MISPLACED DECIMAL POINTS, THEY WILL KILL YOU!
And there is a big difference between the lower case letter "L" and the number 1, even though they may look the same on paper.......
_________________
Lawyers are done: Emmons SD-10, 3 Dekleys including a D10, NV400, and lots of effects units to cover my clams... |
|
|
|
Richard Sinkler
From:
aka: Rusty Strings -- Missoula, Montana
|
Posted 29 Mar 2012 8:17 am
|
|
Storm is right. The black pad is the perfect finish.
I keep having to come back to this post to make sure I wasn't dreaming when I saw this gorgeous guitar.
Martin, do you ever plan to build for others? Ever plan to build a D10? Your work is as good or better than a lot of the"top" brands on the market now. I think you and Bent are creating some of the most awe inspiring guitars I have ever seen.
And as for covers, LeAnn is making the best covers I have ever seen. Unfortunately, when I bought my covers (D2F), I didn't know about her or she wasn't making them yet. She will get any future orders for covers from me.
_________________
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112,Ibanez Gio guitar, Epiphone SG Special (open D slide guitar) . Playing for 54 years and still counting. |
|
|
|
Leann Sharp
From:
Nashville,Tennessee, USA
|
Posted 29 Mar 2012 8:28 pm
|
|
Martin,
I've always been honored you've chosen me to make the covers for your beautiful steel guitars!
Thank you,
Leann
_________________
Custom made covers for steel guitars, amps, keyboards, steel seats
& products for steel guitar musicians
Sharp Covers Nashville
www.facebook.com/leann.sharp
www.calsharp.com |
|
|
|
Larry Baker
From:
Columbia, Mo. U.S.A.
|
Posted 30 Mar 2012 2:41 pm
|
|
Nice looking cover Leann......thanks for the great work. Martin, that is a great looking Steel too.
_________________
Mullen G2 SD10 3 & 5 The Eagle
NV112 amp===Earnie Ball V.P. |
|
|
|
Leann Sharp
From:
Nashville,Tennessee, USA
|
|
|
|
Duncan Hodge
From:
DeLand, FL USA
|
Posted 30 Mar 2012 3:22 pm
|
|
Martin, that is just about the prettiest steel I have ever seen. Florida must be the best climate to make steels in, 'cause you may have just won the prize for "Best in Show"
From one Florida boy to another...Attaboy!.
Duncan
_________________
"The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over." |
|
|
|
