Author |
Topic: Sho Bud undercarriage |
Dave Yustin
From: Vermont, USA
|
Posted 18 Feb 2012 12:58 pm
|
|
I was looking at this LDG to buy and don't know what undercarrige it is. Not rack and barrel, doesn't look like 2 hole pullers and its not hex shafts like I've already got.
Anbody tell me what it is and how it compares with the others?
Thanks
Dave Yustin
![](http://bb.steelguitarforum.com/userpix1029/9525_LDG_undercarriage_2.jpg) |
|
|
![](templates/respond/images/spacer.gif) |
Lane Gray
From: Topeka, KS
|
Posted 18 Feb 2012 1:13 pm
|
|
It tunes with nylon nuts? The first guitar I learned on, a borrowed LDG, had that kinda deal. I guess it's from later on, I guess late 70s. Every change had its own rod. I never thought anything of it. _________________ 2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects |
|
|
![](templates/respond/images/spacer.gif) |
Bill Terry
From: Bastrop, TX
|
Posted 18 Feb 2012 1:23 pm
|
|
I had a Pro I from somewhere in the late 70's with that changer/puller system. Worked great for me. _________________ Lost Pines Studio
"I'm nuts about bolts" |
|
|
![](templates/respond/images/spacer.gif) |
Lynn Stafford
From: Ridgefield, WA USA
|
Posted 18 Feb 2012 2:23 pm Sho Bud undercarriage
|
|
Dave,
Pro II / III under carriage with 2 hole pullers looks like what you have there. I noticed an interesting use for the bracket that's normally used for the 2nd string half-stop lower. Here is a photo of a mid 70's Pro III that I restored a couple of years ago to give you an idea of what belongs there.
![](http://bb.steelguitarforum.com/userpix1029/3239_DSC00760_1.jpg) _________________ Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
![](templates/respond/images/spacer.gif) |
John Billings
From: Ohio, USA
|
Posted 18 Feb 2012 2:45 pm
|
|
That type of system started in '74. May have been modded as time passed. I don't know, as my cut-off point is '74. Don't know nothin' about these "new" Shobuds! My late '74;
![](http://bb.steelguitarforum.com/userpix1029/3167_Finished_002_8.jpg) |
|
|
![](templates/respond/images/spacer.gif) |
Dave Yustin
From: Vermont, USA
|
Posted 18 Feb 2012 8:05 pm Sho Bud undercarriage
|
|
Thanks for all the information.
Lynn, I haven't bought it yet, but if I do, I'll look into your idea on the 2nd string half stop.
It's this one or an S-10 Emmons push pull.
Thanks
Dave |
|
|
![](templates/respond/images/spacer.gif) |
Sonny Priddy
From: Elizabethtown, Kentucky, USA, R.I.P.
|
Posted 19 Feb 2012 6:55 am Ldg
|
|
These Are The Best Sho-bud Of All I Think The Two Hole Pullers I Had One Or two. great Guitars. Sonny. |
|
|
![](templates/respond/images/spacer.gif) |