| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Sound in FOH
Reply to topic
Author Topic:  Sound in FOH
Lyle Bradford

 

From:
Gilbert WV USA (deceased)
Post  Posted 18 Jan 2012 1:22 pm    
Reply with quote

We spend a lot of money for speakers and fx. When we are going thru a mixer to the FOH what are you favorite speakers to use out front so that the sound we taylor is not lost?
View user's profile Send private message Send e-mail
Bill Moran

 

From:
Virginia, USA
Post  Posted 18 Jan 2012 3:03 pm    
Reply with quote

Thats a big question ! The amount of money your willing to spend will answer that question. Speakers is not the only factor on sound. Everything in the chain makes a difference.
_________________
Bill
View user's profile Send private message Send e-mail
Lyle Bradford

 

From:
Gilbert WV USA (deceased)
Post  Posted 18 Jan 2012 3:14 pm    
Reply with quote

I thlnk you are right Bill. I am talking on a smaller scale of 100 people etc. I was just wondering what system to buy that would maintain the steel without losing our coveted sound.
View user's profile Send private message Send e-mail
Ken Metcalf


From:
San Antonio Texas USA
Post  Posted 18 Jan 2012 3:26 pm    
Reply with quote

I am a fan of JBLs
I use Mackie and JBL with no problems in a compact sys.
I often just use my monitors as mains..
_________________
MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes
View user's profile Send private message Send e-mail
James Collett

 

From:
San Dimas, CA
Post  Posted 18 Jan 2012 7:07 pm    
Reply with quote

Ideally, the goal of a sound system is to duplicate and amplify its inputs in the most accurate way feasible (without taking into account EQ and effects on individual channels). So it's not so much how nice the gear is, but can it get a "flat" and natural sound in the room (although it may take some equalization to counteract resonance or unpleasant frequencies). If it's set up properly, and your setup is mic'd/DI'd properly, a sound rig should do a decent job outputting anything from a steel to a drumset to vocals.
_________________
James Collett
View user's profile Send private message Send e-mail
Lyle Bradford

 

From:
Gilbert WV USA (deceased)
Post  Posted 18 Jan 2012 7:33 pm    
Reply with quote

Thanks guys for the info. What about using powered JBL,s or is it better to use them with a power amp seperate?
View user's profile Send private message Send e-mail
Dave Hopping


From:
Aurora, Colorado
Post  Posted 18 Jan 2012 9:36 pm    
Reply with quote

I lean towards unpowered speakers with separate amps.More cabling,but more flexibility.JBL is a good brand,but there are others.My personal favorite has been Peavey;they're well made,sturdy,reasonably priced,and sound good.

I'd also think about subwoofers and bi-amping,or even tri-amping.100 people isn't a huge crowd,but you want the FOH to be as clear and transparent as you can get it.
View user's profile Send private message Send e-mail Visit poster's website
John McClung


From:
Olympia WA, USA
Post  Posted 18 Jan 2012 11:45 pm    
Reply with quote

Best piece of gear for FOH: a sound man without his head up his a**. One club I play I KNOW I'm way down in the mix, playing my heart out, but aware that hardly any of it can be heard (they're line dancers, they couldn't care less anyway).
_________________
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
View user's profile Send private message Send e-mail Visit poster's website
Walter Killam


From:
Nebraska, USA
Post  Posted 19 Jan 2012 6:40 am     JBL - expensive but worth it.
Reply with quote

I upgraded to JBL PRX series powered cabs last year and they are great. Nice clean sound reproduction with plenty of power (the rig is rated ~4000 watts) and even with the Amps built in the individual components only weigh ~70lbs or less.

A large plus for my band is reduced set up & tear down time also, we can have the entire stage set up & broken down & in the trailer in less than an hour each way. The Clubs that we play like this particular aspect ALOT.
_________________
Mostly junque with a few knick-knacks that I really can't do without!
View user's profile Send private message Send e-mail Visit poster's website
Walter Killam


From:
Nebraska, USA
Post  Posted 19 Jan 2012 6:43 am     double post!!
Reply with quote

oops.
_________________
Mostly junque with a few knick-knacks that I really can't do without!
View user's profile Send private message Send e-mail Visit poster's website
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 19 Jan 2012 9:27 am    
Reply with quote

As noted before, the entire signal chain and the operator in control of it make or break the sound.

Yamaha "Club" series monitor speakers - the SM12V in particular - are hands down the best bang for the buck on the market today. The cabinets can be used as floor wedges or placed on a stand or pole, used with subwoofers or without, and the driver components aer the same as are used in all the Meyer Sound rigs, top of the line all the way and up to 300 watts (8 ohms) no problem. Response is nearly flat with a small hot spot at 4kHz and another at 8kHz, and bottom end that out-performs many larger and more expensive boxes.

You will need to get a decent power amp, I prefer QSC in the low-cost arena, and REAL EQ, effects and mixer - the dbx 2231 (dual EQ with limiting), TC M-One (dual effects) and Soundcraft GB2 (rack mount mixer) would be my choice for a small reasonably priced setup. Add some decent microphones and a couple hundred dollars of cables and cords and you're golden Smile
View user's profile Send private message Send e-mail Visit poster's website
Johnny Thomasson

 

From:
Texas, USA
Post  Posted 20 Jan 2012 1:22 pm    
Reply with quote

A band I played with for a long time used a high end Peavey mixing console for several years, and I always thought it was just fine. I was amazed at the improvement in our sound when we upgraded to an Allen & Heath Mixwizard. I really would not have thought that a mixer would make that much difference in sound. It just had a clarity and sparkle that wasn't there with the Peavey. Of course, it cost quite a bit more than the Peavey.

As someone already said, everything in the signal chain matters, and the mixing console is no exception. Oh, and +1 on the Yamaha Club Series monitors. I love JBL speakers, but I've compared JBL monitors with the Yamaha Club series, and it's Yamaha hands down.
_________________
Johnny Thomasson
View user's profile Send private message Send e-mail
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 20 Jan 2012 2:53 pm    
Reply with quote

The difference between the Soundcraft GB2 and the A&H Mix Wizard is similarly notable, Johnny, as is the difference in the next step upwards between the Soundcraft and the Midas Venice - there is a real reason to spend the money on the better gear, if you have the money to spend. Buy the cheap stuff and you will enevitably end up spending even more money on the better stuff later anyway...

The same logic applies to other components, especially EQ and dynamics, as a cheap EQ or compressor will cloud up the signal while doing very little to address your audio needs and a very good one will do a better job while remaining practically transparent.
View user's profile Send private message Send e-mail Visit poster's website
Keith Davidson


From:
Nova Scotia, Canada
Post  Posted 28 Feb 2012 12:49 pm    
Reply with quote

Lyle,

here's what we use. awesome sound, lots of power and crystal clear.

Two of these:
Yorkville
NX55P - 550 Watt 12inch Speaker



And one of these:
Yorkville PSA1S - Compact 1400-Watt Active Subwoofer
View user's profile Send private message Send e-mail
Jerry Kippola


From:
UP Michigan, USA
Post  Posted 28 Feb 2012 2:23 pm    
Reply with quote

EAW JFL210, RCF also has a great new line array--
View user's profile Send private message Send e-mail
Jerry Overstreet


From:
Louisville Ky
Post  Posted 28 Feb 2012 3:41 pm    
Reply with quote

FOH is out of my control. I don't own any PA gear and don't plan to anytime soon. I don't worry about that. All I can do is eq my stuff where it sounds good to me where I sit and ask the boys to run it flat and as close to my stage sound as possible. It's out of my hands after that.

Inevitably there has to be some sound coloring due to the characteristics of the FOH stuff.
View user's profile Send private message Send e-mail
Bud Angelotti


From:
Larryville, NJ, USA
Post  Posted 28 Feb 2012 5:09 pm    
Reply with quote

Jerry just nailed it. I used to do alot of solo singer/songwriter stuff. Me and a acoustic guitar. Most of the time the sound would be terrible and they had nice equiptment! Go figure. I took to bringing my own little mixer, set me own eq's & levels, plug it in to THEIR amp in their aux input so it has NO EQing going on except what I have dialed in. Took the "soundman" out of the loop.
View user's profile Send private message Send e-mail Visit poster's website
Tim Sergent

 

From:
Hendersonville, TN, USA
Post  Posted 28 Feb 2012 10:35 pm    
Reply with quote

You're only gonna sound like what the sound man wants you to sound like. He has knobs for days out there. If he has no idea what a steel guitar is supposed to sound like then you're probably in trouble. Most seem to think it's really thin and "twangy" as a lot of them will call it.

We have had 3 different sound men since I have been with Dierks and with each one I have had them come up on stage and stand in front of my amps so that they might have some sort of idea what to shoot for.

Don't worry much about it. Set your amps the way you like them and sit back and enjoy playing. It's out of your hands at that point anyway.

Good luck!

Tim
View user's profile Send private message
Jerry Kippola


From:
UP Michigan, USA
Post  Posted 29 Feb 2012 6:56 am    
Reply with quote

There is more to the mix sound than most think. The steel sound has to fit the mix, just as anything does. The sound we like onstage isn't what always/generally works out front. And it depends on the venue size, it's artifacts, and the dynamics . Outdoors the sound can be more realistic, indoors the wraparound sound can be very different. The low end I like out of my amp onstage is not what I want to hear out front.
View user's profile Send private message Send e-mail
Olli Haavisto


From:
Jarvenpaa,Finland
Post  Posted 29 Feb 2012 7:45 am    
Reply with quote

Play good CD you are familiar with without eq through the system to test different speakers. When the music sounds balanced and natural you`ve found the right speakers.
_________________
Olli Haavisto
Finland
View user's profile Send private message Send e-mail
Dave Grafe


From:
Hudson River Valley NY
Post  Posted 29 Feb 2012 11:03 am    
Reply with quote

A bad operator with the best speakers will sound far worse than will a good sound man with mediocre gear. Unless you are planning on purchasing an entire sound system AND hiring the person who will be operating it take Tim's advice and concentrate on what you CAN do, which is to play the best you can and enjoy yourself. A technically great performance delivered with a scowl will not move an audience nearly as much as utter audio mayhem committed with an authentic smile!
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron