Author |
Topic: String Gauge for Tonemaster Long Scale |
Jim McConnell
From: Oregon, USA
|
Posted 31 Jan 2012 5:02 pm
|
|
I need advice on string gauge recommendations for a 25 3/4" scale length Oahu Tonemaster, tuned to C6th. My local guitar shop has set me up with D'Addario XL Extra Heavy Nickel Wound (.012/.016/.020/.034/.046/.060) I broke the 5th string (.046) attempting to get it to E and still have quite a bit a tension on strings 4,5,6 to the point where I'm tentative to bring it to the G,E,C tuning respectively. Strings 1,2,3 feel light, particularly the 1st. When I mentioned that other recommendations found on PS Forum recommended lighter gauge strings (.014 thru.038), the local shop disagreed. Any further direction would certainly help. |
|
|
|
Mike Neer
From: NJ
|
|
|
|
Karl Fehrenbach
From: Pennsylvania, USA
|
Posted 1 Feb 2012 8:58 am
|
|
Jim, the shop is recommending gauges too heavy for a standard C6 tuning.
Try these gauges going LOW to HIGH:
C .036W, E .030W, G .024W, A .021, C .017, E .014.
W = wound. Varying a thousandth one way or the other will not cause any problems. This discussion comes up quite bit on the forum and I had a similar inquiry myself regarding a 25" scale 8 string lapsteel I have where I thought going a little heavier than this was an option. I was quickly educated by others who chimed in with great advice. This forum is really very helpful. Good luck. |
|
|
|
Jim McConnell
From: Oregon, USA
|
Posted 1 Feb 2012 12:25 pm
|
|
Mike and Karl,
Thanks! I just put on lighter strings and wow! what a difference.. I ended up putting on C .038W, E .030W, G .024W, A .021, C .017, E .014. Buying individual strings, they were out of .036w, but the .038's sound fine. Ya, the shop's recommendations were way off. Tension and sound is nice. Thanks again! |
|
|
|