| Author |
Topic: R&R Sound Amplification - "Solo" Rack Amp |
Anna Procenko
From:
Moscow, Russia
|
Posted 13 Oct 2011 7:45 am |
|
Hey, guys! We would like to introduce you Rob Chapper's review of a new rack "Solo" amplifier
http://www.youtube.com/watch?v=wXV8rPl9TDE
It's a 50 Watt Tube Amp SOLO amp takes only one rack space (1U) – it is very compact and much lighter than other Tube Amps (weight is about 7 kg), what allows to ease transportation and to use it both for Studio and Stage.
3 footswitchable Sounds – CLEAN, LEAD1 and LEAD2 – give possibility of getting from Classic to Modern Sound. Amp SOLO utilizes 12AX7 Preamp Tubes and 6L6 Power Tubes which can be swapped out with EL34s for a more British Vibe. The Tube buffered Effects Loop is a serial/parallel design with the Effects Mix Control knob.
LINE Output: Mono Output can be routed to a Power Amp or a FX Device via a shielded cable.
RECORD Output: Mono Output to a recording console or a live Mixing Board.
A rotary Impedance allows the use of 4, 8 or 16 Ohm Speaker Cabinets.
http://www.facebook.com/rnramplification |
|
|
 |
Jerry Overstreet
From:
Louisville Ky
|
Posted 13 Oct 2011 4:57 pm
|
|
| Interesting and versatile all tube amp in a 1 space rack mount design. |
|
|
|
Michael Holland
From:
Nashville, Tennessee, USA
|
Posted 18 Oct 2011 6:55 pm
|
|
| I see it has an AMP/STBY/PREAMP switch. Does it work as a preamp and amp simultaneously, and then let you use the preamp only in that position? |
|
|
|
Anna Procenko
From:
Moscow, Russia
|
Posted 22 Oct 2011 2:50 am
|
|
| It can be used as a preamp separately, connected to any other power amp you want (Mesa, Marshall etc.) |
|
|
|
