Klusion Deluxe (2 Line)tuning Keys

Will Aytes · From: Bartow, Florida, USA

Need some keys 10 or 20. Uses 2 screws for mounting

THANKS UP FRONT

WILL

Norman Evans · From: Tennessee

http://www.kluson.com/PRODUCTS.htm

Will these work?
Norm

Paul Norman · From: Washington, North Carolina, USA

Will, Do you need these for a pedal steel and what brand. Stew Mac has Kluson replacements for Emmons
and I can look it up if this is what you need.

Will Aytes · From: Bartow, Florida, USA

Yes, these are replacements for Emmons. Thanks for reminding me about Stew Mac. I will look them up.

Thanks Up Front

Will

Paul Norman · From: Washington, North Carolina, USA

From Stew-Mac It is Gotoh 0933 left and right.
You have to drill the mounting holes just a little larger.

Paul Norman · From: Washington, North Carolina, USA

double post, please excuse

Eric Philippsen · From: Central Florida USA

The "Genuine Kluson" replacement tuners do not fit push-pulls. They are not interchangeable with the old Kluson keys. The mounting holes for the new ones do not line up with the holes in the key head.

You would think that th company that owns Kluson would correct that, but no. Go figure.

Anyway, as another mentioned, Gotoh tuners DO fit perfectly and, best of all, their gear ration is higher than the originals. Th only thing they lack is having the words "Kluson Deluxe" down the back.

I use the Gotohs without hesitation on all my push pulls and am very pleased.

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: