| Author |
Topic: Wiring Diagram Needed. |
John H. McGlothlin
From:
Raton, New Mexico
|
Posted 17 Oct 2011 6:39 am |
|
Does anyone have a wiring diagram to hook up this type of switch to a D-10 MSA Classic? Here is a picture
_________________
Marlen SD 10 3 and 5,Fender 5 String Banjo, Flinthill 5 string banjo,Johnson Resonator Guitar, Ibanez AFS75T Country/Jazz Guitar. |
|
|
 |
Papa Joe Pollick
From:
Swanton, Ohio
|
Posted 17 Oct 2011 8:13 am
|
|
| John,It would help if we knew what you wanted the switch to do.. |
|
|
|
Jim Palenscar
From:
Oceanside, Calif, USA
|
Posted 17 Oct 2011 8:58 am
|
|
| Using a DPDT on-on-on switch, connect one pickup hot lead to one corner, the other pickup hot lead to the opposite corner and bridge the 2 center poles to the output jack hot. Tie all the grounds together. If it doesn't work- use the other corners (you can check the switch with a continuity checker beforehand to keep from having the 50% chance of getting it right the 1st time). |
|
|
|
John H. McGlothlin
From:
Raton, New Mexico
|
Posted 17 Oct 2011 9:15 am
|
|
Thanks Jim, this will help me to properly hook up the two pickups correctly.
_________________
Marlen SD 10 3 and 5,Fender 5 String Banjo, Flinthill 5 string banjo,Johnson Resonator Guitar, Ibanez AFS75T Country/Jazz Guitar. |
|
|
|
Gianni Gori
From:
Livorno, Italy
|
|
|
|
