E9 laid out.

ed packard · From: Show Low AZ

Here is a freebee of an E9 chord location workbook.

Besides the related theory, it contains 70 full necks in interval form for combinations of pedals and levers.

It provides a section with chord types for activated pedal and lever combinations. the chord types may be located for any key/root note desired.

Yours for the asking (for a limited time)...e-mail edpackard@citlink.net

When the format is refined, C6 and others may follow.

The file is in Excel, and is in the form of an electronic woorkbook = you may change, add to, delete, etc.. even add VBA skins and controls if you are into such things.

Donny Dennis · From: Atlanta, Texas

Ed,

I have sent you an email as I would very much like to have a copy of the E9 chord location workbook.

Thank you very much.

Regards,

Donny

Bryan Knox · From: Gardendale, Alabama...Ya'll come

Thanks Ed, got your email, looking forward to receiving it the file.

Bryan
_________________
Prevent Juvenile delinquecy...teach children to STEEL

1976 MSA D-10 8+4, Mullen D10 8+4, G&L Skyhawk, Fender '52RI Telecaster, Eastman MD 615 lefty mandolin, Fender DPC750 w/Tubefex, Custom Twin Tweed Cabs w/ Peavey 1504's, 70's Fender Super Reverb, Martin D28-L.

Silvio Bello · From: Los Angeles, California USA

Hi Ed,

Nice of you to offer this!
I'd like to get one of these,too. Email sent.
sb

Donny Dennis · From: Atlanta, Texas

Hi Ed,

I sent you an email but it was returned with the following error message: "- These recipients of your message have been processed by the mail server:
edpackard@citlink.net; Failed; 5.1.2 (bad destination system address)

Remote MTA mx.frontiernet.net: network error

- SMTP protocol diagnostic: 550 Too many invalid recipients"

Am sending you a PM.

Thank's.

Donny

Scott Howard · From: Georgetown, TN, USA

email sent. thanks, Scott

Jim Eller · From: Kodak, TN (Michigan transplant)

Ed,

Sent you an e-mail right after you posted.

Thanks for the offer.

Jim

Sam White R.I.P. · From: Coventry, RI 02816

Hi Ed I sent you a E=Mail and I would Appreciate you book on the E-9 TH
Thank you
Sam White

Thomas Cross · From: Magnolia,Texas, USA

Ed, thank you for workbook, tfc

Doc Hope · From: Plant City, Fl & Greeneville Tn.USA

HI Ed.
I sent you a email,would like to have the E9 chord work book.
Thanks
Doc Hope

ed packard · From: Show Low AZ

Just fired off the mailing to the first batch. It is 1.5MB so may take a while to receive.

If you don't receive, please let me know. Look in your "deleted box" first as some of this spam blocking stuff screws up attachments et al.

Enjoy;

Edp

Thomas Cross · From: Magnolia,Texas, USA

Hello Ed,

I have received the File.

Thank you, tfc

Marco Schouten · From: Amsterdam, The Netherlands

Thanks Ed,
impressive piece of work !!!
_________________
----------------------------------
JCH SD-10 with BL XR-16 pickup, Sho-Bud Volume Pedal, Evidence Audio Lyric HG cables, Quilter Steelaire combo

Sam White R.I.P. · From: Coventry, RI 02816

Hi Ed I got what you sent me but I down load it and when the file is done I click on it and brings up a box for me to put in numbers like Norton Anti Virus.So I don't get any thing.
Sam White

Tim Kowalski · From: Illinois, USA

Ed, I received the file and could only take a brief look at the spreadsheets. This was obviously a tremendous undertaking and looks extremely useful. I am expecting this to light a few bulbs for me. (There are so many that are un-lit)
Thank you very much for sharing your hard work with us. Great job!
_________________
Bad wine is better than no wine.

Terry Pendlay · From: Effingham Illinois, USA

PLEASE SEND A COPY , SOUNDS GOOD THANKS FOR YOUR HELP . TERRY

ed packard · From: Show Low AZ

Terry...please send the request to the e-mail address in the opening post so I don't have to "harvest" e-mails.

Thanks

Clyde Lane · From: Glasgow, Kentucky, USA

Thanks Ed, what a great piece of work.
_________________
Clyde Lane

W. J. Copeland · From: Palestine, Texas, USA

I think it is great when a forum member is willing to take the time and share educational information with others just for the sake of making it easier for someone to learn and improve musically.

Ben Lawson · From: Brooksville Florida

I got it Ed. Thanks for your hard work and generosity.

Ben

Calvin Walley · From: colorado city colorado, USA

count me in for a copy please
_________________
proud parent of a sailor

Mullen SD-10 /nashville 400
gotta love a Mullen!!!

Guitars that i have owned in order are :
Mullen SD-10,Simmons SD-10,Mullen SD-10,Zum stage one,Carter starter,
Sho-Bud Mavrick

ed packard · From: Show Low AZ

Kevin W...{lease ask via the e-mail address in the opening post for this thread...saves me a lot of time.

A caviat...this is an open (unlocked) spreadsheet. You may modify ant row, column, cell, range, etc. therefore you should put a copy away so that you can return to go just incase.

Jeremy Threlfall · From: now in Western Australia

Hi Ed

I'd like to see a copy of that, thanks!

email sent

Jeremy

PS Hows your 'beast' going? Did Sierra ever make the mini-beast you were talking about?

ed packard · From: Show Low AZ

JT...you are on the list.
RE BEAST = doing fine...yes, the 10 string E9 Mini Beast was made by Sierra, as was my Bb13 unit.

James Collett · From: San Dimas, CA

Thanks Ed! Looking forward to getting the spreadsheet! Should be a big help Very Happy

_________________
James Collett

Forum Index > Pedal Steel	Goto page 1, 2, 3, 4, 5 Next	Next oldest topic :: Next newest topic