| Author |
Topic: 10" SPEAKER |
Dave Seddon
From:
Leicester, England.
|
Posted 5 Aug 2011 8:04 am |
|
I am using a Backstage Plus amp at home (35watts,) a great little amp and has a really nice tone which I think could be improved with a better speaker. Has anyone used 10" speakers for steel or can anyone recommend a good replacement. I was considering an Eminence Delta Demon which is I believe, usually used in blues amps. On the other hand would I be better looking at 10" bass speakers??
Cheers Dave. |
|
|
 |
Dave Grafe
From:
Hudson River Valley NY
|
Posted 5 Aug 2011 9:08 am
|
|
| Find a JBL K110 and you will be golden |
|
|
|
Dave Seddon
From:
Leicester, England.
|
Posted 5 Aug 2011 10:37 am
|
|
Tanks for the suggestion Dave but that speaker is not available over here and the shipping costs from the States is just impossible.
Cheers Dave. |
|
|
|
David Mason
From:
Cambridge, MD, USA
|
Posted 5 Aug 2011 4:22 pm
|
|
One of my two "little" speakers is an Eminence Beta-12, and it has a very usable frequency response for steel. They make a Beta-10, it looks to be about the same.
http://www.usspeaker.com/BETA10A-1.htm
The frequency has a peak around 2.2K, then drops off a cliff - just what I need for steel. |
|
|
|
Curt Langston
|
Posted 5 Aug 2011 6:34 pm
|
|
| Weber California 10. |
|
|
|
