| Author |
Topic: nv 112 |
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 20 Jul 2011 12:11 pm |
|
my nv 112 has a really bad buzz nothing hooked up just the amp plugged up and turned on sometimes you can turn it off and back on and it will stop for a minute then start back house wiring is good tried it in a different room same thing i sent it back to peavey it stopped for a little while then started again it is not undert warranty i dont think very annoying any help would be appreciated
_________________
Mike Bowles |
|
|
 |
Jack Ritter
From:
Enid, Oklahoma, USA
|
Posted 20 Jul 2011 1:33 pm
|
|
Any fluorscent bulbs with ballasts in the room or area? These can cause a hum. Jack
_________________
Zum D10 8x5,rev pre-amp, TC M300, Split 12, n-112, IZZY, Hilton vp, Geo L, BJS Hughey, Live Steel |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 20 Jul 2011 6:23 pm nv 112
|
|
thanks jack no fluorescent lights in the house
_________________
Mike Bowles |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 21 Jul 2011 7:34 pm ?
|
|
| Dimmer switches AC line? Does it buzz with no input. Is the reverb control turned up? |
|
|
|
Mike Bowles
From:
Princeton, West Virginia, USA
|
Posted 22 Jul 2011 6:06 am nv112
|
|
thanks mike nothing hooked up to the amp sometimes you can turn it off and back on and it will stop then start buzzing again no reverb turned on at all there are no dimmer switches i moved the amp same thing wiring in the house is good its a new house
_________________
Mike Bowles |
|
|
|
